Beer line, beer pipe, brewery hose, beer hose - 7 mm, complete, 1.5 m

Yes, the robust SK-hose is durable and specially designed for beer transport in the brewing process, which includes food suitability. It ensures a clean beer flow.

The robust SK hose is designed for continuous beer transport in the brewing process and in dispensing systems. It handles hours of tapping without any problems, provided it is properly connected and cleaned.

Yes, the hose is specifically designed as an optimal solution for enthusiasts and home brewers. It is suitable for beer transport in the brewing process.

The assembly of the SK hose is done using the supplied 5/8 inch wing nuts and clamps. For a tight and secure tightening of the wing nuts, special tools are usually not necessary, a suitable wrench can be helpful.

The robust SK hose is resistant to mechanical stress. However, to avoid damage and maintain the service life, care should always be taken not to crush or step on the hose unnecessarily.

The beer line hose has a diameter of 7 mm. This diameter is designed to ensure a clean and even beer flow.

The SK hose is robust and flexible enough for common installation situations. However, for optimal performance and hygiene, it should not be severely kinked or overstretched.

The hose is designed as a beer line and is explicitly declared for beer transport in the brewing process. Use for other drinks is not explicitly excluded, but is not the primary suitability.

Yes, the beer hose is equipped with 5/8 inch wing nuts, clamps and seals and is therefore suitable for common dispensing systems. It is designed for beer transport in the brewing process.

The hose is primarily intended for beer transport in the brewing process. There are no specific temperature specifications for hot wort.

The 5/8 inch wing nuts are a common standard for many German tap systems and beer barrels. However, check the connection size of your specific tap system or barrel in advance to ensure compatibility.

The beer line set is completely pre-assembled with 5/8 inch wing nuts, clamps and seals. The connection should be tight and uncomplicated to establish.

Yes, the seals are replaceable to ensure a long-term tight connection. Replacement seals are available separately and should be replaced in case of wear or damage.

The beer line is supplied as a complete set with attached connections and is designed for a length of 1.5 m. Shortening is possible in principle, but requires professional attachment of new connections, which are not included in the scope of delivery.

The set includes both a straight and a curved spout. The curved spout is ideal for confined spaces or when the beer tap needs to be positioned in a specific direction.

The length of the beer hose is 1.5 meters. This is sufficient for many mobile tap systems to allow flexible positioning.

The length of 1.5 meters provides a fixed framework for the distance between the barrel and the dispensing unit. This can affect the flexibility in positioning, such as when hiding the barrel under the counter.

Yes, the SK hose is explicitly suitable for beer transport in the brewing process. It can be used to transfer beer from the fermentation tank to bottling, provided the hygiene regulations are observed.

Yes, the beer line is delivered as a complete set with all the necessary connecting elements. The scope of delivery includes 5/8 inch wing nuts, clamps and seals.

The robust SK hose is durable and should be thoroughly rinsed with special cleaning agents for beer lines after each use. Regular care ensures a smooth beer flow.