PE Pipe Fitting 20 x 1/2" Female Thread, PP Compression Connector for Water Pipes

A suitable connection with external thread for a garden hose can be mounted to the 1/2 inch internal thread. For reliable sealing of the thread, the use of sealants such as Teflon tape or hemp is recommended.

No, this clamp connector is specifically designed for PE pipes with an outer diameter of 20 mm. For 18 mm pipes, you need a suitable fitting for this diameter.

The connector is designed for standard PE pipes with an outer diameter of 20 mm. A specific minimum wall thickness is not mentioned in the product data, but it fits common PE pressure pipes.

The PE pipe should be pushed into the clamp connector until it reaches the noticeable stop. Only this way is a secure, tight, and long-lasting connection ensured.

The fitting made of polypropylene (PP) and polyethylene (PE) offers very high resistance to corrosion and many environmental influences. This contributes to an especially long and reliable lifespan.

The fitting is primarily intended for PE pipes with a 20 mm diameter. The 1/2" internal thread allows connection to the corresponding external thread of a galvanized pipe.

Yes, the coupling is designed for a nominal pressure of PN 10 (10 bar). It will withstand your household water connection pressure of 8 bar in the long term.

Yes, the fitting is specifically designed for use in drinking water. It provides a safe and durable connection for your system.

This connector was specifically developed for pressure pipe systems in the drinking water sector. It is not primarily intended for heating systems, which typically require higher operating temperatures.

For a safe and permanently tight installation, it is highly recommended to make the pipe system pressure-free before mounting the connector. This prevents leaks.

The material (PP/PE) of the coupling offers high resistance to various environmental influences, including UV radiation. A long lifespan is thus ensured.

No, the connector is particularly suitable for use in drinking water and does not affect the taste or odor of the water. It meets the necessary requirements for this.

No, to the 1/2 inch internal thread you can directly connect standard fittings with a matching 1/2 inch external thread. A special adapter is not necessary.

The fitting is very resistant to environmental influences. Since no explicit temperature limit is specified, in case of frost risk, as with all water-carrying lines, it should be emptied to avoid damage.

Yes, the connector is designed for a nominal pressure (PN) of 10 bar. This is more than sufficient for most private irrigation systems with a pump and provides high safety.

Yes, the clamp connector is designed for easy installation. It can usually be securely and tightly installed with common hand tools or often even by tightening firmly by hand.

Yes, the connector is designed for both private and industrial use. Its robustness and high resistance to environmental influences make it well-suited for agricultural applications.

The connector is made of polypropylene and polyethylene, materials with high resistance to environmental influences. A long service life is therefore expected even when laid in the ground.

It is a clamp connector designed for easy and quick assembly without special tools. The connection is made by tightening the union nut.

The clamp connector allows for easy assembly and disassembly. With careful handling, it can generally be reused for maintenance purposes.