PVC Reducing Coupling 63-50mm x 2 inch, Solvent Weld PN10

The transition is made of hard PVC (PVC-U). Suitability for drinking water systems depends on specific national or regional regulations and is not explicitly stated.

The sleeve has a 1 1/2 inch female thread. So you can easily screw in a component with a 1 1/2 inch male thread directly.

The socket side of the transition is intended for bonding (solvent welding) with PVC pipes to create a permanent connection. The other side has a 2-inch female thread for screwed connections.

Yes, the transition is ideal for this application. The sleeve fits on a 63mm PVC pipe for gluing, and the 2-inch internal thread is intended for direct connection of your pump.

The transition from hard PVC (PVC-U) is resistant to a variety of chemicals. It is therefore also suitable for industrial applications in plant construction.

Yes, the adapter is designed for 63mm PVC pipes and the connection of components with a 2-inch internal thread. It is ideal for koi pond construction and corresponding pump connections.

The PN10 specification (10 bar) applies to a water temperature of 20°C. At higher temperatures, such as 30°C, the pressure resistance of PVC-U pipe systems decreases. It is recommended that this be taken into account when planning.

The adapter is designed for both 63mm and 50mm pipes. The specification "63-50mm" means that it can be used flexibly for both diameters.

Yes, the fitting is designed for an operating pressure of up to 10 bar at 20°C. This is sufficient for many irrigation systems.

Yes, the transition BONI-02260 is designed on one side as a sleeve for 63mm pipes and offers a 2-inch internal thread for your valve on the other side.

Yes, the material is corrosion-resistant and is used in swimming pool and aquarium construction. It is therefore suitable for salty pool water.

With proper bonding by means of solvent welding and sufficient adhesive, the transition offers a perfect and long-lasting seal. This is also suitable for continuous operation.

Yes, the BONI-02260 transition has a sleeve for 50mm PVC pipes and a 2-inch internal thread. With it, you can connect your 50mm pipe with a suitable 2-inch connection.

The fitting is made of hard PVC (PVC-U) and is extremely durable and corrosion-free. It is ideally suited for outdoor applications and use under the ground without rusting.

The transition made of hard PVC is extremely durable and corrosion-free. It is used in pool and pond construction and is suitable for outdoor use.

The material is resistant to a variety of chemicals and is used in industrial and plant construction. However, a compatibility test is recommended for specific aggressive media.

Yes, this fitting is explicitly designed for garden irrigation and sprinkler systems. It withstands the usual pressure and is corrosion-free.

The transition is designed for pipe systems with low water temperatures and low pressures. The pressure resistance of 10 bar applies at 20°C; at higher temperatures, this is reduced.

Yes, this PVC-U fitting is resistant to corrosion and a variety of chemicals, including salt water. It is often used in aquarium and koi systems.

Yes, the fittings must be freed from grease films with a special PVC cleaner. This is crucial for a permanent and tight bond.

Yes, cleaning the fittings before gluing is very important. A film of grease must be removed so that the glue can adhere completely to the surface and create a tight, durable connection.

Yes, the coupling is suitable for irrigation systems and can withstand a pressure of up to 10 bar.

The PVC-U coupling is very durable and can last for many years without problems if installed correctly.

The coupling has a 1 1/2 inch internal thread (coupling x AG). You can easily connect components with the corresponding 1 1/2 inch external thread to it.

No, the coupling is a glue fitting and requires PVC glue for a secure connection.

No, the coupling is not suitable for heating systems, as it is not designed for high temperatures.

Yes, the fitting is designed for a pressure of PN10, which corresponds to 10 bar. A system with 8 bar is therefore within the permissible pressure range of the BONI-02085.

The fitting is made of robust PVC-U and is therefore ideal for pool construction. It is chemical-resistant and ensures long-lasting pipe systems.

This PVC fitting is made of high-quality PVC-U, known for its robustness and durability. It is designed for professional and permanent pipe systems.

Yes, the coupling can be used for rainwater drainage pipes, as it is robust and weatherproof.