50mm HT Drain Pipe, Sewer Pipe, Waste Pipe, 750mm

When installing the HT pipe, a minimum slope of 2 cm per meter of pipe is required. This prevents wastewater from stagnating or solid particles from accumulating.

This HT pipe is versatile. It is suitable not only for sewage and rainwater, but also for ventilation pipes inside buildings.

Yes, the HT pipe can be cut to the desired length with a metal or fine saw. It is important to chamfer the cut edges and remove burrs so that seals and functionality are not affected.

The HT pipe made of polypropylene is characterized by excellent impact resistance and toughness. It behaves robustly under mechanical stress and has only a slight tendency to crack.

Yes, the HT pipe is flame-retardant according to building material class B1. Additionally, it is approved for use with the most common fire protection sleeves from various well-known manufacturers, providing extra safety.

Yes, the HTsafeEM pipe is expressly approved for central vacuum systems and can be used there. This significantly expands its usage possibilities.

After fully assembling the pipe system, simply pull the pipe end back out by one centimeter. This creates an effective length compensation that is important during temperature fluctuations.

Thanks to its smooth surfaces and optimal hydraulics, the HT pipe is not prone to incrustation or deposit formation. It is self-cleaning, ensuring long maintenance intervals and high operational reliability.

The HT pipe is designed for temperature ranges from -20°C to 90°C. It therefore also withstands sub-zero temperatures in an unheated basement without any problems.

The HTsafeEM pipe offers optimal noise behavior and very good soundproofing. This is particularly beneficial if the pipe is laid in noise-sensitive areas such as living areas.

The HT pipe made of polypropylene has high chemical resistance. It is stable in the pH range from 2 (acidic) to pH 12 (basic), making it suitable for various wastewaters.

The patented triple sealing lip of the HTsafeEM pipe ensures a secure seal. If replacement is necessary, the NBR seal is replaceable, which simplifies maintenance and prevents odors.

With our special safety locks, the HT pipe is approved for a maximum pressure of 2.0 bar. Without these, it is primarily designed for pressure-free house drainage.

Yes, the HTsafeEM pipe is resistant to mechanical stress, including pressure washing. The high abrasion resistance and impact resistance ensure longevity and operational safety.