75mm Drain Pipe - Sewer & Waste Water Pipe for House Drainage

Looking for a robust and durable 75mm HT Pipe for your house drainage? Our HT pipe offers the perfect solution for waste water, rain water, and ventilation lines. With its easy installation and high resistance, it's ideal for use in buildings. Benefit from fast processing, secure sealing, and optimal sound insulation.

Key Specifications

Our 75mm HT Pipe provides reliable protection for your drainage needs. With a nominal width of DN 75 and a length of 250mm, it’s ideal for various applications. Manufactured according to DIN EN 1451-1, you can rely on the highest quality. This means you're getting a durable and safe product that meets the highest standards.

Technical Specifications

Product Features and Benefits

• Fast Processing: You save time during installation with simple plug-in connections.
• Secure Sealing: Thanks to the patented 3-fold sealing lip, your pipe system is reliably sealed.
• Optimal Noise Behavior: You benefit from a quiet pipe system due to good sound insulation.
• Made in Germany: You receive a quality product that meets the highest standards.
• Long Durability: You can rely on an extremely long service life.
• Chemical Resistance: The pipe is stable against biogenic sulfuric acid corrosion.

Advantages of Our Product

• Better price-performance ratio compared to other pipe systems.
• Easy and quick installation through plug-in connections.
• High chemical resistance, ideal for aggressive waste water.
• Very good sound insulation for a quiet living environment.
• Long service life and operational safety.
• Low tendency to crack formation and crack propagation.
• Robust behavior under mechanical stress.

How to Use: Step by Step

1. Step 1: Cut the pipe to length – Measure the required length and cut the HT pipe with a fine saw.
2. Step 2: Deburr and chamfer – Remove sharp edges and chamfer the pipe end slightly.
3. Step 3: Prepare the plug-in connection – Clean the socket and the pipe end.
4. Step 4: Put together – Insert the pipe into the socket until it stops and then pull it back about 1 cm to ensure length compensation.
5. Step 5: Check – Check the tightness of the connection.