DN 75 HT Cleanout Pipe for Reliable Drainage

Yes, the pipe system is made of polypropylene and withstands temperatures from -20° to 90°C. It is therefore ideal for hot wastewater from household appliances.

Yes, the HTsafeRE system is specifically designed for central vacuum systems. With our safety locks, it is approved for a maximum pressure of 2.0 bar.

The system is extremely durable and designed for longevity and operational safety. Thanks to the smooth surfaces and self-cleaning, it is hardly prone to deposits, allowing for long maintenance intervals.

When laying the pipe system, a minimum slope of 2 cm per meter is required. This ensures that the wastewater does not stagnate and solid particles do not accumulate.

HT pipes can be shortened with a metal or fine saw. It is important to chamfer the saw edges and remove any internal burrs to avoid damaging seals and ensure a proper connection.

Yes, the HTsafeRE tube is designed for temperature ranges from -20° to 90°C. It can therefore be used without problems in an unheated basement or other cold environments.

Thanks to the smooth surfaces and optimal hydraulics of the polypropylene material, hardly any deposits form. The system is self-cleaning, leading to long maintenance intervals and high abrasion resistance.

The HTsafeRE pipe is approved with our extraction safety devices up to a maximum pressure of 2.0 bar. This ensures a secure connection even during temporary backflow.

The system has high chemical resistance and is stable in the pH range from pH 2 to pH 12 (acidic to basic). It is also stable against biogenic sulfuric acid corrosion.

The HTsafeRE system offers optimal noise behavior and very good sound insulation. It was specifically designed for drainage inside buildings, even in noise-sensitive areas.

Yes, after complete assembly the pipe is pulled out one centimeter. This creates effective length compensation in the system, as intended for installation.

The HTsafeRE pipe system is primarily intended for drainage inside buildings (according to DIN 1986-4). Although it is temperature resistant from -20° to 90°C, its main application is indoors.

The HTsafeRE cleaning pipe uses standard push-fit connections. Any HT pipe DN/OD 75 with a beveled end (spigot side) fits securely into the socket. The patented triple sealing lip ensures reliable sealing.

The pipe system is flame retardant (building material class B1). It is also approved for use with the most common fire protection sleeves from various well-known manufacturers, which facilitates installation in fire protection areas.