Valve with External Thread Connection HYDRO 16 mm / G3/4"

Yes, the valve has transparent viewing windows. These allow for easy visual inspection of the water flow.

Yes, the product includes the valve body, the rotary valve and the threaded connection. It is ready for integration into your HYDRO system.

It is recommended to clean the valve regularly with clear water. This removes deposits and ensures reliable functionality.

Yes, the HYDRO valve is designed for an operating pressure of up to 4 bar. A pressure of 3.5 bar is therefore within the permissible range.

Yes, by targeted regulation of the flow per section, the valve minimizes water consumption and ensures a uniform supply of moisture. This conserves resources and reduces overwatering.

The valve is designed to be pressure-resistant and withstands typical garden pressure loads up to 4 bar. Thanks to UV-stabilized plastic, it is suitable for permanent outdoor use, but should be stored frost-free.

Yes, the assembly is easy. You cut the drip hose, insert the ends into the valve sockets, and screw the G3/4" thread into the water pipe if necessary. No special tools are needed.

Yes, the valve is ideal for zone control in large systems. It allows you to control the water flow in individual sections and thus water in a targeted manner.

The rotary valve allows individual control of the water flow. You can meter the flow per line and thus not only open or close completely.

The valve enables a specifically adjustable flow per section. You can meter the water flow individually per line, which allows for precise control.

The valve is designed for a temperature range of 0 to 40 °C. At temperatures above 40 °C, the functionality may be impaired.

The G3/4" threaded connection is designed for direct connection to water pipes with an internal thread. Additional sealing is usually not necessary, but can be done with hemp or Teflon tape if needed.

Yes, the valve is made of high-quality, UV-stabilized plastic. It is designed to withstand typical garden pressure and sunlight.

No, the HYDRO valve is not frost-resistant. It should be removed at temperatures below 0 °C and stored frost-free to avoid damage.

Yes, by precisely regulating the water flow per section, the valve reduces the risk of overwatering. This prevents drought stress and conserves resources.

The HYDRO valve is designed exclusively for use with the 16 mm drip hose of the HYDRO system. Compatibility with other hose diameters is not given.

The valve is designed exclusively for compatibility with the 16 mm drip hose of the HYDRO system. Other hoses are not suitable.

Yes, the valve is equipped with a G3/4" external thread. This fits universally to standard water connections with internal thread.

It is recommended to avoid excessive chemical cleaners. Instead, clean the valve regularly with clear water to remove deposits.

The valve is made of high-quality, UV-stabilized plastic. To avoid deposits, it should be cleaned regularly with clear water.