Drip Irrigation Pressure Reducer 16mm Universal Connector

The assembly is quick and safe. The connection is conveniently connected to your water source via standard quick couplings, and the drip hose is easy to connect. Then check all connections for leaks.

Yes, the integrated internal filter is designed to catch dirt and impurities. This prevents such particles from entering your drip irrigation system and protects the drippers from clogging.

The pressure reducer is permanently set to an operating pressure of 1.5 bar. Manual adjustment of the pressure is not provided for in this model. It works automatically to maintain this value.

The pressure reducer should be connected directly to the water supply with standard quick couplings. This reduces the pressure for the entire system to 1.5 bar from the start and protects the system.

The pressure reducer is designed to lower a higher input pressure to the optimal operating pressure of 1.5 bar. It cannot increase the water pressure if it is already below 1.5 bar.

Yes, the pressure reducer actively protects your system. It prevents overpressure damage and minimizes wear and tear on the entire irrigation infrastructure, which secures your investment in the long term.

Yes, by reducing the water pressure to the optimal operating pressure, the pressure reducer minimizes wear and tear on the entire irrigation system. This protects your investment in the long term.

Yes, the pressure reducer reliably reduces the water pressure to 1.5 bar. This effectively prevents overpressure damage to your drip system and ensures a constant water flow.

This universal connection, SKU BONI-19-080, is specially designed for 16mm drip irrigation systems. It is not directly compatible for 13mm hoses.

Yes, the integrated internal filter effectively catches dirt and impurities. This protects the drip irrigation system from the ingress of fine particles and ensures even water distribution.

The internal filter protects against contamination and should be checked and cleaned as needed, depending on the degree of contamination of the water, to ensure the optimal function of the system. A fixed cleaning frequency is not specified.

Yes, the BONI-19-080 automatically reduces the input pressure to the optimal operating pressure of 1.5 bar. This ensures a constant water flow, even with fluctuating domestic water pressure.

No, the pressure reducer works automatically as soon as it is connected to the water supply. It regulates the pressure independently to the optimal 1.5 bar, without any adjustment being necessary.

Yes, the integrated internal filter of the pressure reducer protects the entire irrigation system. It prevents the ingress of contaminants, which extends the life of the system and avoids overpressure damage.

The pressure reducer is designed to reduce a higher inlet pressure to 1.5 bar. With an inlet pressure below 1.5 bar, the pressure cannot be increased, as the device only reduces, but does not amplify.

The universal connection is designed for 16mm drip irrigation systems like HYDRO™. It reliably reduces the pressure to 1.5 bar to supply the entire system with even pressure, even with longer hose runs.

The internal filter reliably catches dirt and impurities, including rust particles from older pipes. This keeps your drippers clean and functional.

Yes, the connection can be easily connected to your water source via standard quick couplings.

The integrated internal filter catches dirt and impurities, which is advantageous for the use of rainwater. However, the pressure reducer requires a sufficient input pressure, which a rain barrel usually does not provide without a pump.

The pressure reducer is designed for use in irrigation systems, but it should be protected from frost. It is recommended to remove it in winter and store it frost-free to avoid damage.

Yes, the integrated internal filter prevents the ingress of impurities such as lime particles into the drip irrigation system. This protects your system and extends its lifespan.

Yes, the assembly is very easy. You connect the connection to your water source and the drip hose using standard quick couplings.

Yes, the pressure reducer reliably reduces the water pressure to a constant 1.5 bar. This ensures a uniform water flow and protects your drippers from overpressure damage for stable irrigation.

Yes, the installation is very simple. You connect the BONI-19-080 conveniently via standard quick couplings to your water source and then connect the drip hose.

Yes, this universal connection is specially designed for 16mm drip irrigation systems. It can be seamlessly integrated into your existing system.

The pressure reducer is designed to protect the drip irrigation system from overpressure and to ensure a constant operating pressure. Whether it protects your specific pump depends on its design and operating conditions.

No, you do not need special adapters. The pressure reducer is designed for connection to the water supply with standard quick couplings.

Yes, the connection is designed for stable and permanent irrigation. It minimizes wear and tear on the entire system and is suitable for both amateur gardeners and professional applications.

Yes, the integrated internal filter of the pressure reducer catches dirt and impurities. This effectively protects your drippers and the entire system from the ingress of particles.

The pressure reducer is designed as a universal connection for your 16mm drip irrigation system to reduce the system pressure to 1.5 bar. It is typically installed at the beginning of the system to regulate the pressure for all subsequent lines.