15m Hose Water Level - Precision Leveling Tool

The hose water level is designed exclusively for transferring horizontal height levels. For vertical alignments, such as when setting door frames, you need a conventional spirit level or a plumb bob.

It is advisable to drain the water after use, especially before longer storage or in case of frost. This will prevent algae formation and possible damage to the hose.

Normal tap water can be used for the hose water level. For optimal readability and to protect against algae formation, we recommend clean water.

The BONI-22-100 enables more precise measurement than a laser device and has funnels with a millimeter scale. This allows even very small height differences to be precisely detected.

Fill the device slowly with water to avoid air pockets. A slight movement of the hose can help to release any bubbles and let them rise to the funnel.

Yes, the 15-meter length of the hose is sufficient for a 10x6 meter garage. The longest diagonal is about 11.66 meters, which is easily covered (roughly calculated: about 11.66 m diagonal).

Light wind hardly affects the precision of the hose water level, as long as the funnels are held steady. Small fluctuations can occur in strong wind or vibrations.

Yes, the hose level is usually easier and faster to use for height measurements over longer distances. You save time and achieve more precise results without complicated realignment.

Yes, the BONI-22-100 is ideal for gardening with its precise height measurement and 15 m length. You can use it to level the base of a wall exactly and ensure a uniform height.

The hose water level is based on the principle of communicating vessels and measures the actual water surface, which is extremely accurate when used precisely. At a length of 15m, the deviation remains minimal due to this physical principle and is often more accurate than with some laser devices.

For the most precise and easiest handling of the hose water level, two people are ideal. One person holds the reference point, the other moves the second funnel.

Yes, the BONI-22-100 is designed for precise height measurements and guarantees more accurate results than a laser device. It is ideal for exact leveling, even with a planned slope.

The funnels of the hose water level have a millimeter scale for precise reading. In poor lighting conditions, the use of an external light source is recommended to ensure accuracy.

Yes, the 15-meter length of the hose water level is sufficient to transfer height points in an 8x5 meter room. You can easily measure over a diagonal of about 9.4 meters with it.

Yes, the device is designed to transmit height levels over longer distances and obstacles. The flexible hose also allows measurements around corners or over walls.

The funnels are designed to be break-proof. The hose is robust for use in construction and gardening, but should be protected from direct, sharp impacts to ensure precision.

With proper closure of the funnel, refilling the water with regular use is rarely necessary. Just make sure that no water evaporates or spills.

A separate calibration is not necessary for the hose water level. It is sufficient to fill the hose correctly with water so that the fill levels can be read in both funnels.

The funnels are declared break-proof, which means a high resistance to impacts and lighter falls. They are designed for robust use on construction sites.

The millimeter scale is precise and easy to read in sufficient lighting conditions. In twilight or poor light, readability may be limited, then additional lighting is recommended.