Pipe Insulation Tube, 35mm, 2x1m, Foam Pipe Lagging

Each pack of CLIMAFLEX® contains two 1-meter pieces, so a total of 2 meters of insulation hose. For 7 meters of pipe you need 4 packs, as this gives 8 meters of insulation. (Roughly: one pack per 2 meters of pipe).

The insulation hose is delivered in 2 x 1m rods for shipping reasons. For 8 meters of pipe you need 8 individual 1m pieces, which corresponds to 4 packs of the product.

The insulation is primarily intended for heating and sanitary areas indoors. Prolonged direct UV exposure outdoors is not recommended.

For insulation thicknesses of 5, 9 and 13mm, the material has fire behavior class BLs1d0. This is a very good classification for fire protection.

Yes, the insulation hose offers sound-absorbing insulation. This ensures improved acoustic comfort in the area of use.

Yes, the insulation is suitable for cold water pipes according to DIN 1988 200. The closed-cell polyethylene reliably prevents the formation of condensation.

Yes, the insulation meets both the requirements of the GEG (Building Energy Act) and the DIN standards for heating and sanitary applications.

CLIMAFLEX® naturefoam enables professional thermal insulation for energy savings of up to 80%. This noticeably improves the efficiency of your system.

Yes, that is possible without any problems. The insulation hose is designed for a temperature range of 0°C to +100°C.

Yes, the insulation hose is designed for a temperature range of 0°C to +100°C. Permanent use at 90°C is therefore possible without any problems.

The CLIMAFLEX® naturefoam is designed for a temperature range up to +100°C. So it can also be used for very hot pipes.

Yes, the insulation is also suitable for cold water pipes according to DIN 1988 200. It provides thermal insulation for energy saving.

Yes, CLIMAFLEX® offers sound-absorbing insulation that improves acoustic comfort and reduces noise from the water pipes.

The insulation has fire class BLs1d0, which represents a very good fire protection classification. It is therefore suitable for indoor use without hesitation.

The insulation hose is designed for a pipe diameter of 35 mm. It therefore fits exactly and closes flush with the pipe.

The insulation hose is designed for a temperature range of 0°C to +100°C. This makes it suitable for high temperatures in the boiler room.

Yes, the product meets the current GEG (Building Energy Act) and DIN requirements. It is therefore suitable for heating pipes in old buildings.

Each pack contains two rods of 1 meter, so a total of 2 meters of insulation. For a pipe length of 3 meters, you will therefore need two packs of the insulation hose.

The insulation hose is designed for a pipe diameter of 35 mm. This corresponds to common standard dimensions in the heating and sanitary sector and ensures an optimal fit.

The product is a flexible insulation material made of foamed polyethylene. It can be easily installed around pipe bends without breaking.

Yes, the CLIMAFLEX® naturefoam insulation hose is specially designed for heating and sanitary areas. It has a temperature range of 0°C to +100°C.

CLIMAFLEX® is a flexible insulation material made of foamed polyethylene. It can be easily placed around pipe bends and processed without tearing.

Yes, the insulation has an inner diameter of 35 mm. A pipe with an outer diameter of 32 mm therefore fits well into the insulation hose.

The 2m bar is cut into two 1-meter pieces for shipping reasons. So you will receive two 1-meter bars directly.

The material is a flexible insulation made of foamed polyethylene and adapts well to surfaces. Minor imperfections are usually not a problem.

Yes, the insulation contributes to professional thermal insulation and can improve energy savings by up to 80%. This increases the efficiency of the entire system.

The insulation hose is designed for a temperature range of 0°C to +100°C. Thus, it is also suitable for lines with temperatures just below the boiling point.

CLIMAFLEX® naturefoam is made of foamed polyethylene with at least 50% renewable raw materials. It is also a CO2-neutral product throughout the entire manufacturing process.

Yes, the CLIMAFLEX® insulation hose is designed for heating pipes and can reduce energy losses by up to 80%. This leads to a noticeable reduction in your heating costs.

Absolutely. The professional thermal insulation of the CLIMAFLEX® significantly reduces the heat loss of your heating pipes. This also leads to an energy saving of up to 80% in unheated basements.