54mm Pipe Insulation Sleeve, 9mm Foam Tubing for Heating and Plumbing

Yes, CLIMAFLEX® is a flexible insulation material that adapts well to bends. Thanks to the closed-cell polyethylene, it is also resistant to moisture and condensation.

If you are insulating longer distances, connect the 1m pieces end to end. For optimal insulation, the transitions should be tightly sealed with a suitable insulating tape or special clamps.

The flexible, closed-cell polyethylene from CLIMAFLEX® is easy to handle and adjust. For very confined or difficult-to-access areas, careful planning and, if necessary, cutting is required.

Yes, the closed-cell polyethylene foam can be easily cut to size with a sharp knife or cutter. Pay attention to clean cuts for optimal fit.

CLIMAFLEX® naturefoam offers professional thermal insulation made of closed-cell polyethylene, which saves up to 80% energy and meets the GEG requirements. This is a high-quality solution compared to simple, thin standard insulation.

Yes, with CLIMAFLEX® you can achieve professional thermal insulation. The product enables energy savings of up to 80%, which is clearly noticeable.

CLIMAFLEX® is a CO2-neutral product made of polyethylene with renewable raw materials. Small quantities can be disposed of in the residual waste; for larger quantities, the local disposal regulations for construction waste must be observed.

Yes, the closed-cell polyethylene from CLIMAFLEX® is insensitive to moisture. It prevents the formation of condensation on the insulated pipes and is therefore well-suited for damp environments.

The insulation hose is made of closed-cell polyethylene, which has good resistance to many chemicals. Light splashes of oil or household chemicals should not harm the material.

Yes, the insulation can be used at temperatures from 0°C to +100°C. Therefore, use at a water temperature of 95°C is safe.

The insulation hoses are not designed for repeated opening and closing. For maintenance, the hose usually has to be cut and replaced with a new piece to maintain full insulation performance.

The product images and description do not indicate a factory slit. However, the material made of foamed polyethylene can be easily cut lengthwise with a sharp utility knife.

Yes, the CLIMAFLEX® insulation hose offers sound-absorbing insulation for acoustic comfort. It noticeably reduces noise from running water and the heating system.

Yes, the product offers very good fire behavior of class BLs1d0 for the 9mm insulation thickness. This is a high fire protection classification and offers safety.

The material is flexible and can be shaped for slight bends. For tighter curves or branches, however, precise cuts (mitering) and bonding of the joints are necessary to avoid insulation losses.

Yes, the insulation is designed for the heating and sanitary area and can also be used on cast iron pipes with an outer diameter of 54 mm. The material is versatile.

Yes, CLIMAFLEX® also offers sound-absorbing insulation. It improves acoustic comfort by reducing noise from water pipes.

The CLIMAFLEX® product is primarily designed for technical insulation. Painting or wallpapering is not intended and can negatively affect the material properties or fire behavior.

Yes, this insulation hose is also suitable for cold water pipes according to DIN 1988 200. It reliably prevents condensation and heat entry.

The closed-cell polyethylene structure ensures a permanently high insulation effect. Special maintenance is not required as long as the insulation remains undamaged.

The insulation is designed for pipes with an outer diameter of 54 mm. For 50mm pipes, the hose would be a bit too big, which could affect the insulation effect.

Yes, the insulation hose is designed for a temperature range of 0°C to +100°C. It can therefore also withstand short-term temperatures above 90°C.

With professional installation in the intended area of application (heating/sanitary), CLIMAFLEX® offers efficient and reliable insulation performance for many years thanks to the robust polyethylene.

Yes, CLIMAFLEX® is specially designed for heating and sanitary applications. The temperature range is from 0°C to +100°C, which is suitable for hot water pipes.

Yes, this insulation hose meets the current GEG and DIN requirements for heating and sanitary applications. You can use it without hesitation for new pipes.

The installation of the insulation hose is also easy for laymen. It can be easily cut open and placed around the pipes. Pay attention to a clean bonding of the joints and slots.

The CLIMAFLEX® pipe insulation is suitable for cold water pipes according to DIN 1988 200 and protects in the temperature range from 0°C to +100°C. In the event of strong, long-lasting sub-zero temperatures in the unheated basement, thicker insulation or supplementary measures may be recommended.

No, for shipping reasons, the 2m rod is always cut into two 1m rods. However, this has no effect on the quality of the material.

Each pack of CLIMAFLEX® contains two 1-meter pieces, so a total of 2 meters of insulation hose. For 7 meters of pipe you need 4 packs, as this gives 8 meters of insulation. (Roughly: one pack per 2 meters of pipe).

Yes, the CLIMAFLEX® insulation hose is designed for heating pipes and can reduce energy losses by up to 80%. This leads to a noticeable reduction in your heating costs.