Pipe insulation, insulation tubing, 54 mm, 2m, 13 mm insulation

The CLIMAFLEX® insulation hose is a CO2-neutral product throughout the entire manufacturing process and improves the ecological efficiency of your system. It also consists of at least 50% renewable raw materials.

The insulation thickness of 13 mm of the CLIMAFLEX® has the fire protection class BLs1d0. This means that the material is flame-retardant and produces little smoke.

The temperature range of the CLIMAFLEX® is 0°C to +100°C. This insulation hose is not designed for permanent frost protection at temperatures below freezing.

Yes, the CLIMAFLEX® insulation hose is universally suitable for various pipe materials with an outer diameter of 54 mm. The product table explicitly lists the suitability for copper (CU) and steel (FE) as well as plastic (MSV & PEX).

The CLIMAFLEX® is a CO2-neutral product throughout the entire manufacturing process and consists of foamed polyethylene with at least 50% renewable raw materials. This improves the ecological efficiency of your system and supports sustainable construction projects.

Yes, the CLIMAFLEX® is a flexible insulation material made of foamed polyethylene. The delivery in 1m rods makes it easier to adapt to bends and angled areas.

The CLIMAFLEX® is designed for a temperature range of 0°C to +100°C. It is not primarily designed for permanent frost protection below 0°C in an unheated area, as it only maintains the temperature but does not generate it. Additional heating or insulation with a higher thickness would be required for sub-zero temperatures to prevent freezing.

Yes, the CLIMAFLEX® insulation hose provides sound-dampening insulation for improved acoustic comfort. It effectively reduces the noises from water pipes.

The CLIMAFLEX® is designed as a closed insulation hose and is usually pushed over the end of the pipe. For optimal insulation effect, it should not be cut open.

Yes, the CLIMAFLEX® insulation hose offers sound-dampening properties. It thus contributes to acoustic comfort and can reduce noise from water pipes in heating and sanitary areas.

The flexible insulation material is delivered in two 1m pieces for shipping reasons. This does not affect the quality and allows for easy handling and adaptation to your pipes.

The BONI-3001060 insulation hose has an inner diameter of 54 mm. For pipes with a 50 mm outer diameter, it might be a bit loose, but the insulation effect remains.

Each order of the insulation hose BONI-3001060 contains two 1-meter pieces. For 5 meters you need 3 orders to get 6 meters in six 1-meter pieces. (Roughly calculated: If you need 5 meters, you need 3 units, as each unit delivers 2 meters.)

The CLIMAFLEX® insulation hose has an inner diameter of 54 mm. A typical 1-inch heating pipe has an outer diameter of about 33.7 mm, so this hose would be too large for this pipe dimension.

Yes, the product is based on NMC Naturefoam® with at least 50% renewable raw materials. In addition, the entire manufacturing process is CO2-neutral.

Yes, the CLIMAFLEX® insulation hose is a professional thermal insulation. It can improve the energy saving of the heating system by up to 80%.

Yes, the CLIMAFLEX® is explicitly intended for cold water pipes according to DIN 1988 200 in the sanitary area. The closed-cell structure of the polyethylene foam reliably prevents the formation of condensation.

Each pack contains two 1m rods of the insulation hose. For 3 meters of pipe you therefore need 2 packs to cover the required length. You will then receive 4 individual rods of 1m.

The insulation hose is designed for a temperature range of 0°C to +100°C. If this temperature is briefly exceeded, the insulation effect may be impaired and the material integrity cannot be guaranteed.

Yes, due to the closed-cell structure of the insulation foam, the product is ideally suited for use in sanitary areas. It meets the requirements for cold water pipes according to DIN 1988 200.

Yes, the insulation hose is designed for the heating and sanitary area and is also suitable for plastic pipes such as MSV and PEX. The inner diameter of 54 mm fits for common pipe diameters DN40 and DN50.

Yes, the CLIMAFLEX® insulation hose is GEG-compliant and meets the relevant DIN requirements (DIN 1988 200, EN 806-2). It is therefore suitable for insulating hot water pipes as part of new construction or renovation projects.

The insulation offers professional thermal insulation, which enables energy savings of up to 80%. At 70°C, the hose has a thermal conductivity of 0.045 W/mK, which represents a very good insulation performance for this temperature range.

The CLIMAFLEX® insulation hose is designed for a temperature range of 0°C to +100°C. For permanent temperatures below 0°C, the use is not primarily intended, as the protective effect could be insufficient.

The CLIMAFLEX® primarily offers professional thermal insulation for energy savings of up to 80%. The CO2-neutral manufacturing process is an additional ecological advantage and feature of this product line.

The insulation hose is designed for heating and sanitary areas as well as cold water pipes with a temperature range of 0°C to +100°C. As long as the ambient temperature does not permanently fall below 0°C, the product can help protect against frost.

Yes, the CLIMAFLEX® naturefoam is a closed-cell insulation foam that effectively prevents moisture absorption. It is specially suitable for cold water pipes according to DIN 1988 200 and minimizes condensation formation.

The closed-cell polyethylene foam is robust for the intended use in the heating and sanitary sector. In the event of frequent or heavy mechanical stress, we recommend that additional protection, such as a casing, be fitted.

The professional thermal insulation of the CLIMAFLEX® is designed to enable energy savings of up to 80%. This noticeably improves the efficiency of your system.

Yes, the CLIMAFLEX® insulation hose meets the requirements of the Building Energy Act (GEG) and the relevant DIN standards for heating and sanitary installations. The 13 mm insulation thickness is compliant for most standard applications.