Pipe Insulation Hose, 48 mm x 13 mm, 2 x 1 m Self-Adhesive Tube

Yes, the fire protection class is also relevant for pipes running in the wall for building safety. The CLIMAFLEX XT meets a high fire protection requirement with BLs1d0.

Yes, the CLIMAFLEX XT has sound-absorbing properties. It reduces cracking and flowing noises in the pipes in particular, thus contributing to more acoustic comfort.

Yes, the CLIMAFLEX XT is designed for a temperature range of 0°C to +100°C. Permanent use with 90°C hot water is therefore safe.

Yes, the insulation hose is intended for pipes with an outer diameter of 48 mm and is also suitable for steel pipes (FE). The 13 mm insulation thickness fits well here.

Yes, the insulation hose is suitable for cold water pipes according to DIN 1988 200 and has a temperature range from 0°C. It provides effective insulation even under these conditions.

Yes, thanks to the double-sided self-adhesive closure system, a time saving of up to 50% is achieved during assembly compared to conventional products. This is a major advantage of the CLIMAFLEX XT.

The double-sided self-adhesive closure system of the CLIMAFLEX XT is designed for the heating and sanitary sector, where moisture can also occur. However, permanent exposure to standing water should be avoided.

The CLIMAFLEX XT is suitable for cold water pipes according to DIN 1988 200. Its temperature range is from 0°C to +100°C. In the event of permanent frost below 0°C, the insulation effect may be impaired.

Yes, the CLIMAFLEX® XT is designed for temperature ranges from 0°C to +100°C. Thus, it can be used without problems for hot water pipes up to 95°C.

Yes, the CLIMAFLEX XT is a CO2-neutral product throughout the entire manufacturing process. It consists of NMC NATUREFOAM® with at least 50% renewable raw materials.

Yes, the double-sided self-adhesive closure system enables quick and clean processing. This saves up to 50% of the assembly time compared to conventional products, especially with already laid lines.

Yes, the CLIMAFLEX® XT offers sound-absorbing insulation for acoustic comfort. It reduces cracking and flow noises in the pipes, thus improving the peace in the room.

Yes, the CLIMAFLEX® XT is a professional thermal insulation that reduces heat loss by up to 80%. This also reduces the heat radiation of the pipes into the room.

The CLIMAFLEX® XT has very good fire behavior according to BLs1d0 (EN 13501-1). This means very little smoke development and no burning drips in case of fire.

The insulation hose is available in 2 x 1m rods per package. For 4.5 meters of pipe, you will therefore need at least 3 packages, as this gives 6 meters of insulation. (roughly calculated: 4.5 meters / 2 meters per package = 2.25 packages, rounded up to 3 packages.)

The self-adhesive closure system of the CLIMAFLEX® XT was developed for quick and clean processing. This greatly simplifies assembly, especially in confined or difficult-to-access areas.

Each package contains 2 meters of insulation hose, divided into 2x 1m pieces. For 5 meters of pipe you will need 3 packages to have sufficient length (a total of 6 meters). (Roughly speaking: For 5 meters of pipe, 3 packages are needed, which gives 6x 1m pieces and leaves a meter of reserve.)

Yes, the insulation hose is suitable for copper pipes (CU) with an outer diameter of 48 mm. The insulation fits exactly on this pipe diameter.

Yes, the CLIMAFLEX XT insulation is suitable for pipes in the heating and sanitary sector, including steel pipes, with an outer diameter of 48 mm. This is confirmed by the product description and the table.

The CLIMAFLEX XT is a flexible insulating material and thanks to its self-adhesive closure system it is quick and easy to work with. It can be cut and adapted well, even in hard-to-reach places.

The self-adhesive closure of the CLIMAFLEX® XT is designed for permanent and quick assembly. Re-detaching and re-attaching is not intended and can significantly impair the adhesive performance. Plan the length exactly before gluing.

Although the insulation hose has a proven, double-sided self-adhesive closure system, additional fixing with cable ties or special insulation tape is possible, but not mandatory.

Yes, the insulation hose is also suitable for cold water pipes according to DIN 1988 200. It prevents condensation and can be used for temperatures from 0°C to +100°C.

This insulation is made of NMC Naturefoam® with at least 50% renewable raw materials and is CO2 neutral throughout the entire manufacturing process. It has a positive environmental balance.

The temperature range of the insulation hose is between 0°C and +100°C. At 70°C, it still has a thermal conductivity of 0.045 W/mK, which ensures a good insulation effect.

Yes, the foamed, closed-cell polyethylene is very flexible. It adapts well to pipelines with corners and bends and ensures continuous insulation.

The insulation hose is designed for the heating and sanitary sector, which is typically indoors. Although the temperature range is from 0°C to +100°C, no explicit resistance to weather influences such as rain or permanent UV radiation is shown.

The insulation hose is specially designed for pipes with an outer diameter of 22 mm. For 20 mm pipes, this hose would be a bit too large in inner diameter and would not fit optimally.

Yes, the classification BLs1d0 means a very good fire behavior. Compared to many standard insulations, CLIMAFLEX XT is characterized by low smoke development and no burning dripping, which significantly increases safety.

The insulation hose is designed for a temperature range of 0°C to +100°C. Therefore, it is very suitable for your 90°C hot water pipes.