Pipe insulation, self-adhesive insulation tubing 54 mm x 13 mm, 2 m

Yes, the insulation hose is also suitable for cold water pipes according to DIN 1988 200. It prevents condensation and can be used for temperatures from 0°C to +100°C.

Yes, the double-sided self-adhesive closure system of the CLIMAFLEX® XT enables quick and clean processing. This leads to a time saving of up to 50% during installation, even for less experienced users.

No, the delivery in two 1m rods has no influence on the quality or the easy assembly of the insulation hose. The self-adhesive closure system ensures seamless insulation.

A clean, dry and grease-free surface is always recommended to ensure optimal adhesion of the self-adhesive closure system. The product description highlights the easy and quick processing, which requires good adhesion.

Yes, the insulation hose has an inner diameter of 54 mm (Ø 54 mm). Pipes with a diameter of 50 mm (5 cm) therefore fit in without any problems.

Due to the flexible nature of the foamed polyethylene, the insulation hose can be cut and adapted well. The quick processing by the self-adhesive system also simplifies the insulation on more complex pipe runs.

The insulation hose offers professional thermal insulation that reduces heat loss by up to 80%. This leads to a noticeable improvement in economic efficiency and lowers heating costs.

The energy saving becomes noticeable immediately after insulation, as heat losses are reduced. The product can reduce heat losses by up to 80%, which significantly improves the efficiency of the entire system.

The CLIMAFLEX® XT meets the GEG and DIN requirements for insulation in the heating and sanitary sector. Whether the 13 mm insulation thickness is sufficient in your specific case depends on the exact pipeline and the specific GEG requirements. Please check the relevant sections of the GEG for your project.

The fire behavior BLs1d0 is a very good classification according to EN 13501-1. It means that the insulation hose is hardly flammable, has very little smoke development and does not form burning droplets. This contributes significantly to safety and meets high requirements for escape routes.

The CLIMAFLEX® XT is designed for permanent thermal insulation. Removal without residue, which would allow later reuse, is not intended due to the strong adhesive system.

The CLIMAFLEX® XT is designed for a temperature range of 0°C to +100°C. The double-sided self-adhesive closure system is designed for this range and ensures a secure hold and permanent insulation even at 90°C.

The CLIMAFLEX® XT is designed for pipes up to an outer diameter of 54 mm. The insulation itself has an inner diameter of 54 mm, making it ideal for the corresponding pipes. For smaller diameters, the insulation effect can also be given, but the fit is not perfect.

The proven closure system and the double-sided self-adhesive cutting edge are designed for a permanent and secure connection. With correct installation, a long durability is given.

The material of the insulation hose has a unique fire behavior of BLs1d0 according to EN 13501-1. This meets the highest fire protection requirements.

Yes, the insulation hose has sound-dampening properties. It is designed to effectively reduce cracking and flowing noises in heating and sanitary pipes. This contributes to improved acoustic comfort.

The product is designed for a temperature range of 0°C to +100°C. It is therefore also suitable for heating pipes with high temperatures.

CO2 neutrality in the manufacturing process improves the ecological balance of your system. For everyday life, this means you are using an environmentally friendly product that contributes to more sustainable home technology.

The insulation hose is suitable for common pipe materials in the heating and sanitary sector. These include copper (CU), steel (FE) and plastic (MSV & PEX).

The insulation hose has an inner diameter of 54 mm. For smaller pipes, the insulation would not fit optimally and would leave cavities.

Yes, the insulation hose is CO2 neutral throughout the entire manufacturing process. It consists of NMC Naturefoam® with at least 50% renewable raw materials and has a positive environmental balance.

The 13 mm insulation thickness of the CLIMAFLEX® XT meets the requirements of the GEG (Building Energy Act) and DIN 1988 200 for the specified applications heating and sanitary.

Yes, the flexible material and the self-adhesive closure system allow for easy and quick installation even in hard-to-reach places. The processing is clean and uncomplicated.

Yes, the insulation hose has sound-dampening properties. It reduces cracking and flowing noises on the pipes in particular, thus increasing acoustic comfort.

The double-sided self-adhesive closure system of the CLIMAFLEX® XT is specially designed for quick and clean processing. This makes installation significantly easier and up to 50% faster than with conventional products, even in hard-to-reach places.

Due to the strongly adhesive, self-adhesive closure system, the insulation hose is not intended for reuse without damage after installation. For maintenance work, it usually has to be removed and replaced.

The insulation hose is cut into 2 x 1m rods for shipping reasons. Each of these 1m pieces has the proven self-adhesive closure system on both sides along the lengths. The cut edges at the ends are not self-adhesive.

The product is equipped with a double-sided self-adhesive closure system that enables safe and quick assembly. With professional installation on clean pipes, additional fixing for straight sections is generally not necessary.

Yes, the CLIMAFLEX® XT is expressly applicable for cold water pipes according to DIN 1988 200. Its closed-cell structure and thermal insulation reliably protect against condensation.

The CLIMAFLEX® XT is made of foamed polyethylene with at least 50% renewable raw materials and is CO2-neutral in the manufacturing process. Special disposal rules are not mentioned in the product description, so disposal can be carried out like ordinary polyethylene.