Pipe Insulation, Self-Adhesive, 60mm x 13mm, 2m

Although the insulation hose has a proven, double-sided self-adhesive closure system, additional fixing with cable ties or special insulation tape is possible, but not mandatory.

Yes, the CLIMAFLEX® XT is designed for a temperature range of 0°C to +100°C. It retains its full insulation performance even at high ambient temperatures in summer.

The material has been classified with a fire behavior of BLs1d0. This means that in the event of a fire, it has very little smoke development and does not form burning droplets.

The insulation hose is designed for pipes with an outer diameter of Ø 60 mm. The insulation thickness of 13 mm meets the GEG and DIN requirements for the heating and sanitary sector.

No, cutting the 2m bar into 2 x 1m pieces for shipping has no impact on the quality of the goods. You get the full insulation performance and the proven easy assembly.

The CLIMAFLEX® XT is suitable for cold water pipes according to DIN 1988 200. As a closed-cell polyethylene, it effectively prevents the formation of condensation.

The individual 1m pieces of CLIMAFLEX® XT can be easily and tightly joined together thanks to the double-sided self-adhesive closure system. Make sure the cut edges are clean and flush to avoid thermal bridges.

Thanks to the self-adhesive closure system, the assembly time with the CLIMAFLEX® XT can be reduced by up to 50%. This enables twice as fast insulation of laid cables.

Yes, the insulation is especially suitable for already laid pipes. The double-sided self-adhesive closure system of the CLIMAFLEX® XT enables quick and clean installation without disassembly.

Yes, the sound-dampening properties of the CLIMAFLEX® XT help to reduce cracking and flow noises in the pipes. This improves acoustic comfort, even with pressure or temperature fluctuations.

For optimal and permanent adhesion of the self-adhesive system, a clean and dry pipe surface is recommended. This ensures the full functionality of the proven closure system.

Yes, the CLIMAFLEX® XT is suitable for all common pipe materials in the heating and sanitary sector, provided that the outer diameter of the pipe matches the inner diameter of 60 mm of the insulation hose. The material of the pipe does not affect the insulation performance.

The insulating hose can be cut cleanly with a sharp knife. The self-adhesive closure system on both sides also allows the easy and tight connection of several pieces to each other.

The CLIMAFLEX® XT can be used in a temperature range from 0°C to +100°C. These values correspond to the EN 14707 standard.

The insulation hose is designed for pipes with an outer diameter of 60 mm. The 13 mm thick insulation fits exactly and optimally encloses the pipe for the best insulation.

NMC NATUREFOAM® is a closed-cell polyethylene foam with at least 50% renewable raw materials. It offers high technical functionality, a positive environmental balance, and is CO2-neutral in production.

Yes, the insulation hose has sound-absorbing properties and is designed for acoustic comfort. It reduces cracking and flow noises, which can also reduce vibrations.

The thermal conductivity of the material is temperature-dependent and is between 0.036 W/mK at 0 °C and 0.045 W/mK at 70 °C. This means that the insulation performance decreases minimally at higher temperatures, but the energy saving remains high.

The CLIMAFLEX® XT is designed for pipes with an outer diameter of 60 mm and has an insulation thickness of 13 mm. After insulation, the pipe will have a total diameter of approx. 86 mm (roughly calculated: 60 mm pipe + 2 x 13 mm insulation).

Yes, by reducing heat losses by up to 80%, the CLIMAFLEX® XT reduces the energy consumption of your heating or cold water system. Less energy consumption means a direct reduction in CO2 emissions during operation (roughly calculated: up to 80% of the previous CO2 emissions due to heat loss).

Yes, the CLIMAFLEX® XT is a professional thermal insulation. It reduces heat loss by up to 80% and thus contributes significantly to energy savings and the reduction of heating costs.

The closed-cell polyethylene of the CLIMAFLEX® XT is age-resistant and dimensionally stable. The high insulation performance of up to 80% remains constant throughout the product's lifespan.

The CLIMAFLEX® XT is already equipped with a double-sided self-adhesive cutting edge. It can be opened to be placed around pipes that have already been laid, and then simply closed again. This enables twice as fast assembly as with conventional products.

Yes, the 13 mm insulation thickness is designed for typical heating pipes and can reduce heat loss by up to 80%. The CLIMAFLEX® XT also meets the GEG and DIN requirements for heating and sanitary applications.

Yes, the CLIMAFLEX® XT is produced CO2-neutral and consists of at least 50% renewable raw materials. The product is characterized by a positive environmental balance.

Yes, the CLIMAFLEX® XT meets the requirements of the Building Energy Act (GEG) and the relevant DIN standards such as DIN 1988 200 and EN 806-2. It is therefore standard for heating and sanitary systems.

Yes, the installation is particularly easy and quick. The flexible material and the self-adhesive closure system of the CLIMAFLEX® XT allow for clean processing even in confined spaces.

As a flexible insulating material made of foamed polyethylene, the hose is easy to handle. For tight bends or special adjustments, precise cutting with a sharp knife is recommended.

The closed-cell polyethylene from NMC NATUREFOAM® is designed for high technical functionality and durability. It reliably maintains its shape and insulation performance within the specified temperature range of 0°C to +100°C.

Yes, the insulation hose is designed for a temperature range of 0°C to +100°C. This also includes the usual operating temperatures of solar thermal systems, making it well suited for this purpose.