Pipe Insulation, 1m Insulation Tubing, Ø 18 mm x 13 mm, Foam Pipe Insulation

Each pack of CLIMAFLEX® contains two 1-meter pieces, so a total of 2 meters of insulation hose. For 7 meters of pipe you need 4 packs, as this gives 8 meters of insulation. (Roughly: one pack per 2 meters of pipe).

Yes, the CLIMAFLEX® insulation hose is designed for heating pipes and can reduce energy losses by up to 80%. This leads to a noticeable reduction in your heating costs.

Absolutely. The professional thermal insulation of the CLIMAFLEX® significantly reduces the heat loss of your heating pipes. This also leads to an energy saving of up to 80% in unheated basements.

Yes, the hose is suitable for cold water pipes according to DIN 1988 200.

Yes, the insulation hose can also be attached to slightly corroded pipes, as long as the surface is still stable and has no sharp edges. The closed-cell structure does not affect the function.

With a pipe circumference of 9 cm (90 mm), you need a pipe diameter of about 28.6 mm. Our insulation hose with an inner diameter of 28 mm is very suitable for this. (Roughly calculated: circumference 90mm divided by Pi gives approx. 28.6mm diameter).

Yes, the insulation hose meets the requirements of the GEG and DIN 1988 200 and EN 806-2. It is therefore in accordance with the standards for use in heating and sanitary areas.

The double-sided self-adhesive closure system is designed for uncomplicated handling. Therefore, the attachment should also be easy for older people.

The CLIMAFLEX® insulation hose is a CO2-neutral product throughout the entire manufacturing process and improves the ecological efficiency of your system. It also consists of at least 50% renewable raw materials.

The CLIMAFLEX® is primarily designed for heating and sanitary areas as well as cold water pipes according to DIN 1988 200. It is usually not used for wastewater pipes.

The CLIMAFLEX® is a CO2 neutral product throughout the entire manufacturing process. It consists of foamed polyethylene with at least 50% renewable raw materials, which improves the ecological efficiency of the system.

Yes, CLIMAFLEX® is a flexible insulation material that adapts well to bends. Thanks to the closed-cell polyethylene, it is also resistant to moisture and condensation.

The insulation hose is delivered in 2 x 1m rods for shipping reasons. For 8 meters of pipe you need 8 individual 1m pieces, which corresponds to 4 packs of the product.

The insulation is primarily intended for heating and sanitary areas indoors. Prolonged direct UV exposure outdoors is not recommended.

For insulation thicknesses of 5, 9 and 13mm, the material has fire behavior class BLs1d0. This is a very good classification for fire protection.

Yes, the insulation hose offers sound-absorbing insulation. This ensures improved acoustic comfort in the area of use.

Yes, the insulation is suitable for cold water pipes according to DIN 1988 200. The closed-cell polyethylene reliably prevents the formation of condensation.

Yes, the insulation meets both the requirements of the GEG (Building Energy Act) and the DIN standards for heating and sanitary applications.

CLIMAFLEX® naturefoam enables professional thermal insulation for energy savings of up to 80%. This noticeably improves the efficiency of your system.

Yes, that is possible without any problems. The insulation hose is designed for a temperature range of 0°C to +100°C.

Yes, the insulation hose is designed for a temperature range of 0°C to +100°C. Permanent use at 90°C is therefore possible without any problems.

The CLIMAFLEX® naturefoam is designed for a temperature range up to +100°C. So it can also be used for very hot pipes.

Yes, the insulation is also suitable for cold water pipes according to DIN 1988 200. It provides thermal insulation for energy saving.

Yes, CLIMAFLEX® offers sound-absorbing insulation that improves acoustic comfort and reduces noise from the water pipes.

The insulation has fire class BLs1d0, which represents a very good fire protection classification. It is therefore suitable for indoor use without hesitation.

The insulation hose is designed for a pipe diameter of 35 mm. It therefore fits exactly and closes flush with the pipe.

The insulation hose is designed for a temperature range of 0°C to +100°C. This makes it suitable for high temperatures in the boiler room.

Yes, the product meets the current GEG (Building Energy Act) and DIN requirements. It is therefore suitable for heating pipes in old buildings.

Each pack contains two rods of 1 meter, so a total of 2 meters of insulation. For a pipe length of 3 meters, you will therefore need two packs of the insulation hose.

The insulation hose is designed for a pipe diameter of 35 mm. This corresponds to common standard dimensions in the heating and sanitary sector and ensures an optimal fit.