Self Adhesive Pipe Insulation, Flexible, Black, 42x10mm

The insulation is resistant to aging, which also concerns the color stability. It is designed for permanent insulation in various environments and retains its appearance.

The insulation prevents frost damage to water pipes thanks to its excellent thermal conductivity and optimal thermal insulation of 0.034 W/mK at 0 °C.

The insulation is made of soft foam based on synthetic rubber and is very easy to work with. A normal, sharp utility knife is perfectly adequate for a clean cut.

The pipe insulation is designed for a temperature range of up to +110 °C. It is not suitable for higher peak temperatures, such as those that can occur in solar thermal systems.

The closed-cell structure of the insulation material effectively prevents moisture absorption and condensation. This reliably protects against mold and corrosion damage, even in more humid environments.

Yes, the insulation is flexible and adapts well. This flexibility also makes installation easier on uneven surfaces or curves.

The roll should be stored away from sunlight. The product description does not provide specific information on UV resistance for permanent use outdoors.

The insulation is specifically intended for heating, hot water and cooling systems and is not explicitly designated for waste water pipes. One roll of the AEROFLEX® SH XT has a length of 2 meters.

The black design of the pipe insulation was deliberately chosen to reduce visual disturbances. It offers an unobtrusive and professional look for various environments.

Each roll of AEROFLEX® SH XT pipe insulation has a length of 2 meters. The product is only available in black.

No, the pipe insulation is self-adhesive on the back and adheres firmly to metallic surfaces. If necessary, you can additionally secure the longitudinal sides with adhesive tape to ensure optimal tightness.

The AEROFLEX® SH XT insulation has a temperature resistance that is designed for typical pipe applications of heating systems. The closed-cell foam based on rubber is robust and resistant.

Yes, the AEROFLEX® SH XT pipe insulation is ideal for insulating heating and air conditioning pipes. It efficiently protects both heating and cooling systems.

The pipe insulation is resistant to aging and is designed for a long service life. It provides permanent insulation in various environments.

Yes, the SH XT is suitable for hot water pipes and provides permanent insulation. Its durability and resistance to aging make it ideal for such installations.

The SH XT is designed for durability and is characterized by its resistance to aging. It offers permanent insulation, so a quick replacement is not necessary.

The flexibility of the material makes it easy to handle during installation. A sharp knife is recommended for cutting, which also allows laymen to make precise adjustments.

Yes, the AEROFLEX® SH XT is suitable for insulating cooling systems. Its closed-cell structure minimizes heat transfer and effectively prevents condensation.

One roll of AEROFLEX® SH XT is 2 meters long. If you want to insulate 10 meters of pipe, for example, you would need 5 rolls. (Roughly: Each roll covers 2 m.)

Yes, the closed cell structure of the AEROFLEX® SH XT minimizes heat transfer and effectively prevents condensation. This is ideal for cold water or cooling systems.

Yes, the insulation is flexible and adapts well. The elasticity of the rubber base allows installation even on uneven surfaces for seamless insulation.

The AEROFLEX® SH XT insulation has a cross-section of 54 x 10 mm. It therefore fits ideally for pipes with an outer diameter of up to approx. 34 mm. (Roughly calculated: 54mm outer diameter of the insulation minus 2x 10mm wall thickness gives the maximum pipe diameter.)

Yes, the AEROFLEX® SH XT is designed for typical pipe applications. It is resistant to aging and moisture, which supports outdoor use and ensures a long service life.

The SH XT is designed for easy and efficient assembly. Thanks to the self-adhesive layer and flexibility, you can quickly apply the insulation even without special knowledge.

The self-adhesive layer is designed to adhere firmly and enable tool-free installation. Additional securing is only recommended for overlapping longitudinal sides for optimal sealing.

The AEROFLEX® SH XT insulation is flexible and can be easily adapted to pipe bends. For optimal adhesion, you can apply the material in sections or, if necessary, overlap the longitudinal sides and secure them with additional tape. A sharp knife makes precise cutting easier.

Yes, the AEROFLEX® SH XT minimizes heat transfer due to its special construction and thus effectively reduces energy losses from hot water pipes. This increases the energy efficiency of your system.

The AEROFLEX® SH XT is flexible and can be efficiently applied to pipes of different sizes. You can cut the material with a sharp knife and, if necessary, overlap the longitudinal sides and secure them with tape.

The insulation has a cross-section of 54 x 10 mm and is wrapped around the pipe. It is flexible and therefore adapts well to pipes of different diameters, including thinner lines.

Yes, due to its closed-cell structure, the insulation does not absorb water and prevents condensation. This helps to protect the pipes from moisture and thus indirectly from corrosion.