1 1/4 inch Female Threaded Brass Fitting with Quick Connect

Yes, the connector is designed for use in water, air, and hydraulic systems. It offers a tight and secure connection.

The quick coupling is designed for quick disconnection and reconnection without tools. The precise manufacturing and pressed brass ensure a reliably tight connection even with frequent use.

The threaded fitting is compatible with most common pipe and hose systems, provided the pipe has a suitable 1-inch external thread. The material of the pipe, such as aluminum, is not relevant here.

Yes, the quick coupling allows for rapid disconnection and reconnection without tools. This significantly speeds up assembly and maintenance work.

The threaded fitting made of corrosion-resistant pressed brass is durable and designed for water applications. It is suitable for underground installation, with the quick-connect function being less relevant here.

The 1-inch internal thread is dimensioned for a good flow rate and is also used in systems with high operating pressure. It should supply enough water for common large-area sprinklers.

Yes, the assembly is done without tools by manual screwing and clipping. This does not require a lot of effort.

The threaded fitting is designed for high operating pressures in water, air, and hydraulic systems. A tight connection is guaranteed even at 7 bar, provided the assembly instructions are followed.

Yes, if necessary, the seal can be reworked after installation with a suitable sealant. This is described in the application instructions.

The connector has a 1 inch (approx. 32 mm) internal thread. If your garden hose connection has a suitable 1-inch external thread, the threaded fitting is suitable for it.

The threaded fitting is made of high-quality pressed brass, which offers excellent corrosion resistance. Even with constant contact with moisture, such as in the garden, it is very durable.

The quick coupling is designed for quick disconnection and reconnection without tools. The precise manufacturing ensures lasting ease of use and a secure connection.

The brass threaded fitting is supplied without a separate seal on the thread. The tightness of the claw coupling should be checked regularly and supported with sealant if necessary.

Yes, the threaded fitting has a 1-inch inner thread. This diameter is sufficient for high flow and quick drainage with heavy-duty pumps.

The tool-free assembly by simply clicking in is very user-friendly. The system is robustly designed and should be easy to operate even with dirty hands or gloves.

Yes, the threaded fitting is compatible with quick couplings with a 40 mm lug spacing. It fits common systems like GEKA and comparable older versions.

The threaded fitting is designed for water, air and hydraulic systems. If your pond pump needs a 1 inch connection and you want a quick coupling, it is suitable for that.

Yes, the precise manufacturing of the brass threaded fitting ensures a tight connection even under high operating pressure. It is designed for demanding connection tasks.

Yes, the quick coupling fits common systems like GEKA and has a lug spacing of 40 mm. It is therefore compatible with GEKA plus.

The assembly is possible without tools. You screw in the threaded piece manually and simply clip in the quick coupling to obtain a tight connection.

Yes, the quick coupling allows tool-free assembly by simply screwing and snapping it into place. The precise manufacturing from pressed brass ensures a tight and secure connection.

The threaded piece should be screwed in manually until it is tight. For maximum tightness, a suitable sealant and slight retightening can be used if necessary.

The threaded fitting is made of corrosion-resistant pressed brass. This ensures a long service life and makes it suitable for permanent outdoor use.

Yes, the threaded fitting has a 1 inch internal thread (approx. 32 mm). It is compatible with most common pipe and hose systems of this size.

Yes, the threaded fitting is expressly suitable for air and hydraulic systems. The robust construction made of pressed brass ensures a safe and tight connection for compressed air.

The threaded fitting has a standard 1 inch internal thread (approx. 32 mm). It is compatible with most common pipe and hose systems in commercial and private areas.

Yes, the threaded fitting is suitable for common systems like GEKA. It is ideal for connection tasks in water installations.

The threaded fitting has a 1 inch female thread (approx. 32 mm). For connection with a 3/4 inch pipe, a suitable reducing adapter would therefore be required.

The brass threaded fitting is corrosion-resistant, however, a water-carrying system should be emptied if there is a risk of frost. Freezing water can damage the component.

Yes, the quick coupling has a standardized 40 mm lug spacing. Therefore, it is also compatible with other systems that use this spacing.