2/3 Hose Fitting Brass 2" Female Thread - 50 mm

Yes, the connection ensures a tight seal and withstands high pressure, which is also relevant for the suction side of pumps.

Disassembly is easy by loosening the nut and pulling out the hose. We recommend checking for cracks or wear before reuse.

No, this connector is precisely designed for hoses with a diameter of 50 mm and a 2-inch internal thread. It does not fit smaller garden hoses.

Yes, the robust construction of brass and high pressure stability make the connection ideal for demanding applications. It is suitable for agricultural or industrial hose lines, including construction water pumps.

Yes, the fitting is made of brass and offers high resistance to corrosion and chemical influences, including saltwater.

The precise compatibility for 50 mm hoses and the pressure-resistant construction ensure a secure and tight connection even at high flow rates.

The hose assembly is designed for easy hand installation. You don’t need additional tools, just hand-tightening the union nut.

Yes, the brass fitting is pressure-resistant and withstands high pressure. It is well-suited for agricultural or industrial hoses.

The brass connector is robust and durable, which comes with a certain weight. The easy hand assembly, however, facilitates frequent connecting and disconnecting.

Yes, the part should be cleaned with clear water after use and stored in a dry, frost-free place. This preserves functionality and prevents damage.

The brass processing offers high resistance to corrosion and chemical influences, making the fitting suitable for use with oils.

Yes, the brass processing offers high resistance to chemical influences. The connection is therefore also suitable for irrigation systems with fertilizer addition.

It is important to cut the hose end clean and straight. Then fully insert the hose into the socket.

Yes, the brass fitting is ideal for permanent use outdoors, such as in irrigation systems, due to its high corrosion and weather resistance.

The fitting is designed for hoses with an inner diameter of 50 mm. For hoses with very thick walls, handling may vary.

The nut is designed for easy hand assembly. If needed, a sealant can be used for support, but a tool is not strictly necessary.

The connector's design with optimized sealing surfaces minimizes the risk of leaks. Precise fit for 50 mm hoses contributes to tight sealing.

The brass connector is suitable for demanding outdoor applications. When installed underground, sufficient protection against mechanical damage and frost must be ensured.

Yes, the fitting is designed to be vibration-resistant and pressure-stable. This ensures long-lasting use and secure sealing even under vibrations.

Yes, the connector is designed for hoses with a 50 mm diameter and a 2-inch internal thread. It ensures a tight and pressure-stable connection, suitable for pond pumps.

If your sprinkler has a 1/2 inch external thread and you use a 13 mm (1/2 inch) garden hose, this fitting is suitable. It securely connects the hose and thread.

After preparing the hose, slide it over the fitting’s hose barb. Then tighten the nut to create a secure and tight connection.

Yes, the fitting made of high-quality brass is corrosion-resistant and wear-resistant, ensuring a long lifespan even under demanding outdoor conditions.

Yes, due to the material brass, the fitting is robust, durable, and ideally suited for permanent outdoor use in the garden, even in the rain. Brass is known for its corrosion resistance.

With this hose connection, the 13mm hose is pushed over the conical nozzle. It is then ideally secured with a hose clamp for a safe and tight connection.

The connector is made of durable brass and is very long-lasting. It is corrosion-resistant and can remain outdoors permanently, even in winter.

The hose fitting BONI-34111 has a 1/2 inch internal thread (IG). It can thus be connected to components with a matching 1/2 inch external thread (AG).

Yes, this hose fitting is specifically designed for this purpose. The 13 mm hose barb fits the hose, and the 1/2 inch internal thread fits the pump.

Yes, since the connection is 2-part, it can easily be disassembled if needed. This allows flexibility in use and potential maintenance work.

Yes, both parts of the hose fitting, both the hose nipple and the union nut, are made of robust brass. This ensures longevity and reliability of the entire unit.