64-67mm Stainless Steel Hose Clamp - Heavy Duty Adjustable Pipe Clamp

Yes, the smooth inside of the clamp ensures an even distribution of tension around the hose. This helps to avoid damage or constrictions, even with softer hose materials.

The band and housing of the clamp are made of corrosion-resistant stainless steel W2. This allows for permanent use outdoors.

Yes, this clamp is manufactured in industrial quality according to DIN 3017 and is designed for the secure fastening of pressure hoses. It ensures a reliable connection.

No, no special attachment is required to tighten the screw. The hexagon socket can be operated with a standard wrench or ratchet.

Yes, the smoothly machined inner side of the bolt clamp ensures an even pressure distribution. This makes it also suitable for thin-walled pipes or hoses without crushing or damaging them.

Yes, the clamp with a clamping range of 64-67mm is ideally suited for your 66mm compressed air hose. It ensures a secure and firm connection.

The clamp is manufactured in industrial quality and is designed for the secure attachment of suction pipes. The smooth inner side of the band also ensures an even distribution of tension, which increases stability.

Yes, the joint bolt clamp is designed for secure and permanent fastening. Its industrial quality and robust construction also make it suitable for applications with continuous vibrations.

Yes, the bolt clamp is manufactured in industrial quality according to DIN 3017 and offers a secure and stable attachment for pond filter hoses. It is suitable for suction and pressure hoses.

The joint bolt clamp is designed for use in agriculture, such as on manure tankers. Its robust construction ensures a secure connection, even if the hose is exposed to slight twisting movements.

The band and housing of the clamp are made of stainless steel W2, but the screw is made of galvanized steel. Galvanized steel is corrosion-protected, but can rust in the long term with permanent moisture.

The bolt clamp is designed for reuse. Just make sure the screw is not overtightened and the band remains undamaged.

Yes, the clamp is designed for use in industry, agriculture and crafts. Its industrial quality according to DIN 3017 ensures a secure fastening even with thick-walled industrial hoses.

No, no special tool is required to tighten the screw. The clamp has a hexagon socket that can be tightened with a standard Allen key or a nut.

The bolt clamp is specially designed for the secure fastening of pressure hoses and corresponds to industrial quality according to DIN 3017. The W2 material (stainless steel for band and housing) ensures corrosion resistance in a humid environment.

The band of the 64-67mm joint bolt clamp has a width of 24mm. This ensures a large contact surface and a secure hold on the hose.

Yes, the joint bolt clamp BONI-41011-45 is designed for a clamping range of 64-67mm. An outer diameter of 65mm is therefore ideally within the appropriate range.

Yes, you can use the clamp for PVC hoses. The smooth inner side of the clamp ensures an even distribution of tension and minimizes the risk of damage to the hose material.

The band and housing of the clamp are made of corrosion-resistant stainless steel (W2) and are therefore well suited for permanent outdoor installations. The screw is made of galvanized steel, which makes it less corrosion-resistant than the stainless steel housing.

Yes, the joint bolt clamp BONI-41011-45 is made of stainless steel W2 and is corrosion-resistant. It is well suited for fastening suction pipes in wet environments such as the pond area.

Yes, the 64-67mm model is designed for hoses with an outer diameter of 64mm. The clamp can be tightened securely and firmly to ensure a reliable connection.

Yes, the clamp is designed for suction pipes and can also securely fasten hard PVC pipes. The smooth inside of the band distributes the clamping pressure evenly, thus minimizing the risk of damage.

Yes, the clamp is equipped with a hexagon socket for secure tightening and is robustly constructed. It can also be used in applications where hoses need to be occasionally loosened and reattached.

No, the clamping range of the joint bolt clamp is designed exactly for diameters from 64 to 67mm. For a hose with 63.5mm, this clamp would be too large, as the minimum clamping range starts at 64mm.

Yes, the joint bolt clamp can be used for silicone hoses, provided the outer diameter is within the clamping range of 64-67mm. The smooth inner side of the band ensures material-friendly and even tension distribution.

The band and housing of the clamp are made of corrosion-resistant stainless steel W2. However, for permanent salt water applications, a higher material quality (e.g. W4/W5) is often recommended.

No, the screw of this clamp is made of galvanized steel. Only the band and the housing of the hinge bolt clamp are made of corrosion-resistant stainless steel (W2).

Yes, the 64-67mm model is corrosion-resistant thanks to the W2 stainless steel of the band and housing and is suitable for damp environments. The galvanized steel screw may show corrosion in permanently extreme humidity, but is sufficient for normal basement humidity.

The clamp is manufactured in industrial quality according to DIN 3017 and designed for demanding environments. It provides secure fastening and is robust enough to withstand constant mechanical stress.

Yes, this hinged clamp with a clamping range of 29-31 mm is perfect for a 30mm irrigation hose. The smooth inner side of the band additionally protects the hose from damage.