70mm Hose Clamps, Stainless Steel Joint Bolt Clamp, DIN 3017

The smooth inner side of the clamp ensures an even distribution of tension around the hose. This helps to avoid crushing and allows for secure tightening via the hexagon socket.

Yes, joint bolt clamps offer a high clamping force and are suitable for the secure fastening of pipes. For applications on the exhaust, we recommend the corrosion-resistant W2 stainless steel version.

The joint bolt clamp you have selected is designed for a clamping range of 64-130 mm, with a band width of 24 mm. A hose with a diameter of 65 mm is therefore securely in the lower range of this clamping range and can be firmly attached.

Yes, industrial quality according to DIN 3017 means that the clamps are designed for demanding conditions. They are tested for a long service life and safe, permanent connections in industry, agriculture and crafts.

Yes, the joint bolt clamps have a hexagon socket. This is designed for secure tightening with standard hex keys or sockets.

Yes, for a 100mm suction hose, select a clamp from the clamping range of 64-130mm. The 24mm wide band width of this size ensures a secure fastening.

Yes, these bolt clamps are often used in agriculture. They ensure a secure fastening of hoses, including rubber hoses, and are designed for these applications.

For permanent use in a damp environment, the W2 variant is the better choice. Its band and housing are made of stainless steel, which guarantees high corrosion resistance. The W1 variant only uses galvanized steel, which can be more susceptible to rust with constant moisture.

The clamps ensure a secure attachment of hoses. Their smooth inner band side guarantees an even tension distribution, which also enables a firm connection with structured suction hoses with a spiral.

For damp areas like the garden, the W2 variant is the better choice. It has a band and housing made of stainless steel, which offers significantly higher corrosion resistance than the galvanized W1 variant.

Yes, the industrial quality according to DIN 3017 means high material and manufacturing standards. This also guarantees a particularly durable and reliable hose connection in the private sector.

The bolt clamp ensures a secure fastening even under stress. The hexagon socket allows for tight tightening, and the smooth inner band side distributes the tension evenly.

Yes, these bolt clamps are explicitly designed for applications in industry, agriculture and crafts. The industrial quality according to DIN 3017 guarantees a secure and permanent fastening of hoses and suction pipes, even under demanding conditions.

Yes, the W2 variant is made of stainless steel and is corrosion-resistant according to DIN 3017. It is therefore well suited for use with more demanding media such as waste water.

The industrial quality is confirmed by the manufacturing according to DIN 3017, which guarantees high standards in material and workmanship. Even in private use, you benefit from the longevity and reliability of the clamps.

Yes, that's exactly what the smooth inner side of the clamp is designed for. It ensures an even distribution of tension around the hose. This helps prevent the material from being crushed or damaged when tightening.

Yes, a hose diameter of 65mm is well within the specified clamping range of 64-130mm. The bolt-type clamp is designed for secure fastening in this range and guarantees stability.

For contact with more aggressive liquids like manure, the W2 variant made of stainless steel is clearly preferable. W1 (galvanized steel) is more corrosion-resistant than simple steel, but is not designed for permanent use in such applications.

Yes, the smooth inside of the band ensures an even distribution of tension around the hose. This leads to a more effective and tighter connection than with clamps with an irregular inner surface.

The clamp has a hexagon socket for the screw. This can easily be tightened with a commercial open-end wrench or ring wrench, so no special tools are required.

Thanks to the hexagon socket, the clamps can be easily tightened and loosened again. Thus, a hose change can be carried out without complications if necessary.

The joint bolt clamps are primarily designed for the secure fastening of hoses and pipes. Their even distribution of tension also makes them suitable for fixing other round objects that do not require pressure guidance.

The joint bolt clamps ensure a secure fastening of hoses and pressure hoses. The smooth inner side of the band ensures an even distribution of tension, which contributes to a permanent and tight connection.

Yes, the smooth inner band side of the clamp ensures an even distribution of tension. This minimizes the risk of the hose being damaged or pinched.

The W2 variant is made of stainless steel for the band and housing, which offers high corrosion resistance. It is therefore very suitable for damp environments and ensures a long service life.

These joint bolt clamps are designed for the secure fastening of hoses, suction pipes or pressure hoses in industrial quality according to DIN 3017. They offer reliable hold even with thick-walled hoses.

These bolt clamps are manufactured in industrial quality according to DIN 3017 and are designed for pressure hoses. They offer the necessary stability and secure fastening for such applications.

For permanent outdoor use, where moisture plays a role, we recommend the W2 variant. This is made of corrosion-resistant stainless steel.

For a hose of approx. 140 mm diameter, the clamping range is 131-200 mm. The industrial quality and the smooth inside of the band ensure a tight and secure connection. (Roughly calculated: the largest clamping range covers diameters up to 200 mm.)

The joint bolt clamps have a hexagon socket for secure tightening. This requires the appropriate key, but does not require unusually large free spaces for assembly.