IBC Adapter S60 to 1" - Connect Your IBC Tank with Ease

The assembly is very easy and requires no special tools. The adapter is screwed directly onto the S60 coarse thread of the IBC container.

The adapter has a fixed 1" internal thread for connecting accessories. If your accessory has a different thread than 1", you will need an additional reducer or transition fitting.

Yes, the 1" internal thread of the adapter is a common standard thread. It is compatible with most commercial valves and connections of this size.

Yes, the adapter has an internal seal for the IBC connection. This ensures a secure and tight connection even when the container is full.

Yes, you can connect appropriate irrigation pumps or other connecting plugs to the 1" internal thread. Pay attention to the appropriate thread size of the pump.

Yes, the adapter is equipped with a 1" internal thread that complies with common standards. An irrigation system with 1-inch pipes can thus be connected directly.

The adapter is made of plastic. There are no specific details on resistance to chlorinated water, but it is designed for water applications.

The adapter is made of plastic and is primarily designed for garden irrigation and similar applications. A specific approval for drinking water or food is not indicated for this adapter.

Yes, the adapter is explicitly designed to connect a ball valve or a drain valve with a 1" male thread. The passage has a 1" female thread.

The adapter is made of plastic and is intended for water applications in the garden and irrigation area. There is no information on resistance to use with specific chemicals.

The adapter offers a 1" internal thread. For connecting a Gardena system, you need an additional reducing adapter from 1" to the corresponding Gardena connection size (e.g. 3/4" or 1/2").

No, the adapter is only intended for IBC containers with an S60 coarse thread (60mm outer diameter, 6mm thread pitch) on the connection side. It is not suitable for fine threads.

Yes, this adapter is specially designed for IBC containers with an S60x6 coarse thread. This is the most common thread on the market for IBC outlets.

Yes, the 1" through-hole internal thread is specially designed for connecting valves, spigots or connecting plugs with 1" external thread.

Yes, you can attach appropriate garden hose connections with a 1" male thread to the 1" female thread of the adapter. This allows connection to standard garden hoses.

Thanks to the internal seal, the adapter should be tightened by hand to ensure a tight connection. Overtightening is not necessary and could damage the thread.

As a plastic product, the adapter is basically weatherproof. However, in the event of severe frost, we recommend removing it and storing it in a dry place to avoid material damage from freezing residual water.

Yes, the IBC adapter is equipped with a 1" internal thread and is therefore ideal for the direct connection of a ball valve or outlet valve.

Yes, the S60x6 coarse thread connection on the IBC is often also referred to as a 2-inch outlet. The adapter is designed exactly for this and fits these IBCs.

The adapter is designed for IBC containers with an S60x6 coarse thread (DN 50 or NW50) on the outlet tap. This applies to a large part of the containers on the market. Please check the thread of your older IBC.

The adapter fits IBC containers with an S60x6 coarse thread (DN 50, NW50, DIN61) on the outlet tap. The outer diameter of the container thread should be approx. 60 mm.

The internal seal ensures a secure and tight connection at the IBC connection, regardless of the exact alignment of the container. Firm mounting of the adapter is important.

Yes, if your garden pump has a 1" external thread, you can connect it directly to the 1" internal thread of the IBC adapter. This allows for versatile use.

The adapter is designed for use in garden irrigation and is not designed for high-pressure applications. Connecting high-pressure cleaners is therefore not recommended.

Yes, the S60 adapter is suitable for IBC containers with a 2-inch outlet thread, which corresponds to an S60x6 coarse thread. Please check the outer diameter of approx. 60 mm on the container.

Yes, the adapter allows the connection of an outlet valve or ball valve with 1" thread. With this, you can conveniently fill a watering can directly on the IBC.

Yes, the adapter is designed for IBC containers whose outlet thread is specified as 2 inches. This corresponds to the S60x6 coarse thread with approx. 60 mm outer diameter, for which the adapter fits.

The adapter is made of plastic and is intended for outdoor use. However, for a long service life, we recommend protecting it from severe frost or removing it in winter if not used for a long time.