PVC Reducing Nipple 2" x 1 1/2" - Durable Pipe Fitting

The double nipple made of hard PVC is resistant to a variety of chemicals and is suitable for plant construction. For special media in the industrial sector, we recommend a prior check of the chemical resistance.

The double nipple has an overall length (L) of 25 mm. This is the shortest design to allow the reduction between the two inch sizes.

The PVC-U fittings are described as extremely durable and offer a perfect seal under heavy conditions. They are designed for applications in industrial and plant engineering.

Yes, the double nipple is extremely durable and offers a perfect seal even under heavy conditions. The adhesive ensures a long-lasting and robust connection.

The double nipple is designed for a nominal pressure of PN 10, which corresponds to 10 bar or 150 psi. This is sufficient for most common pond pumps and corresponding systems.

Yes, the bonding of the PVC-U fittings is designed for permanent outdoor use. The hard PVC material is extremely durable and ensures long-lasting tightness even in direct sunlight.

The fittings are suitable for low water temperatures, but are not explicitly designated as frost-resistant. It is recommended to empty pipelines and systems at risk of frost in winter.

Yes, the double nipple has a nominal size of DN 40 and is therefore intended for connection with PVC pipes of the same nominal size. Pay attention to suitable threads on the components to be connected.

This double nipple is designed for pipe systems with low water temperatures. The product is not suitable for the higher temperatures common in solar thermal.

The double nipple is designed for a nominal pressure of PN 10 (approx. 10 bar). It is suitable for garden irrigation systems with occasionally higher pressures, as long as the maximum operating pressure does not permanently exceed this value.

The bonding of the fittings by means of cold welding creates a durable and robust connection. This is not intended for disassembly or reuse and cannot be easily loosened.

The double nipple is designed for a nominal pressure of PN 10 (10 bar). This is a stable pressure for irrigation systems, however, the fittings are ideal for systems with low water pressures.

The processing is very easy thanks to the gluing. It is important to thoroughly clean the fittings beforehand and initially use a little more glue to avoid leaks.

The bonding of the PVC fittings offers a durable and robust connection with perfect sealing under heavy conditions. This is usually superior to a hose clamp connection for permanent installations.

The double nipple made of hard PVC is extremely durable and corrosion-free. If the system is empty and dry, the material can withstand frost outdoors.

The PVC-U fittings are primarily designed for applications in the pool, pond and aquarium sector as well as for irrigation systems. An explicit approval for drinking water pipes is not listed in the product information.

The double nipple has a total length (L) of 25 mm and a height (H) of 61 mm. For the gluing itself, you should plan extra space for handling.

Cleaning the fittings before cold welding is crucial to remove the film of grease produced during manufacturing. Thorough cleaning is the basis for a fully adhering and tight adhesive bond.

For gluing, you only need a suitable PVC cleaner and special PVC glue. The connections are made by solvent welding, which is easy without special tools.

Yes, the PVC-U fittings are resistant to a variety of chemicals. Therefore, they are well suited for use in swimming pools and whirlpools with chlorinated water.

The nipple is designed for a temperature range of -20 °C to +200 °C. It can therefore remain outdoors even in winter temperatures.

Yes, the reducer nipple is made of stainless steel 316 (V4A), which is considered rust-free and permanently corrosion-resistant. It is therefore also suitable for use with saltwater.

Yes, the double nipple is ideal for garden irrigation systems as it is robust and chemical-resistant.

Yes, this stainless steel fitting can be easily removed, unlike welded or press fittings. This allows flexibility during modifications.

The external threads of this reducing nipple are tapered. During installation, it is particularly important to pay attention to proper sealing with suitable thread sealing material such as hemp or PTFE tape to ensure a reliable connection.

Stainless steel 316 (V4A) is highly corrosion-resistant and therefore well-suited for media with chemical additives like fertilizer. It is more resilient than many other materials.

Absolutely, this threaded fitting is ideal for garden irrigation systems. Its rust resistance and durability are major advantages.

The thread needs to be additionally sealed with a suitable sealing material. Hemp or Teflon tape are suitable for this.

Yes, the threads are manufactured according to common standards and allow for a seamless transition to other pipe materials. A special transition fitting is not necessary.

Stainless steel 316 is rust-free, corrosion-resistant, and more durable than PVC, especially under UV radiation and temperature fluctuations. It offers higher mechanical stability and temperature resistance.