3/4 Inch Washing Machine Valve, Appliance Shut Off Valve, Quarter Turn

Yes, the valve is explicitly designed for appliance connection to washing machines and dishwashers. It provides a secure and tight connection.

The valve is DVGW approved and has an aerator and a backflow preventer. These components contribute to hygiene and prevent back contamination.

Yes, the valve is suitable for connection to dishwashers.

The valve is made of brass and matte chrome-plated. This material combination is very robust and corrosion-resistant, so it does not rust under normal conditions.

Yes, the valve is DVGW-approved and therefore suitable for drinking water pipes.

The valve is made of brass and is matte chrome-plated.

The valve has a 3/4" wall connection and is intended for standard water connections. Whether it fits directly to a copper pipe depends on its connection thread.

The outlet valve is intended for wall connection. The description does not provide information about special suitability for concealed installations.

The valve is mounted on the wall and operated with a toggle top.

Yes, the valve can be connected to a copper pipe.

The hose fitting offers a firm and tight connection.

Yes, the 3/4 inch wall connection is a standard size for house installations and is therefore suitable for connecting washing machines in the basement.

Yes, the integrated backflow preventer is essential to prevent dirty water from flowing back into the drinking water pipe. This is an important hygiene function.

Yes, the valve has an integrated check valve.

The product category "Winterproof Garden Irrigation" indicates a certain frost resistance. However, for permanent protection in severe frost, we recommend turning off the water and emptying the line.

Yes, the valve with a 3/4" wall connection and a 1" outlet thread is also suitable for the garden hose connection. The category "Winterproof Garden Irrigation" indicates a corresponding robustness.

Yes, the valve can also be used for a garden hose connection.

The aerator ensures that air is mixed into the water stream, which reduces water consumption and prevents splashing.

The wall connection of the valve is 3/4" (approx. 26 mm) and the outlet thread is 1" (approx. 32 mm) with hose connection. These are standard sizes for washing machine connections.

It is recommended to remove or insulate the valve if there is a risk of frost.

Yes, the external connection of the valve is 1/2 inch (about 19 mm) and thus fits common standard wall connections.

Yes, the valve is equipped with an integrated backflow preventer (RV), which prevents dirty water from flowing back from the devices into the drinking water network.

Yes, the valve is easy to install. The compression fitting does not require additional tools.

Yes, the 10mm compression fitting is a very common size. It fits the flexible connection hoses of most standard sink and kitchen faucets.

Yes, this combined corner valve is specially designed for simultaneous connection and separate disconnection of a washbasin and washing machine. The comfort handle allows for easy and independent regulation of both connections.

The Comfortgriff is ergonomically designed for easy handling. It allows precise and comfortable regulation of water flow, even when hands are wet.

Yes, the valve connection is 3/4 inch (approx. 26 mm), which corresponds to the standard connection for most dishwashers.

The combination corner valve is designed for simultaneous operation of the sink and appliances like a dishwasher. It is classified in noise class I, ensuring efficient water flow without noticeable pressure loss at the sink.

Yes, the combination angle valve is designed exactly for this. It allows connection of a sink faucet (via 10mm compression fitting) and simultaneously a dishwasher (via 3/4" appliance connection).

The valve belongs to noise class I, which means a very low noise level during water flow. It therefore operates very quietly.