40mm Flexible PVC Hose, 1m - Pond, Pool, & Plumbing

Yes, the PVC hose is chemical-resistant and therefore well-suited for use with common pond care products such as algae control agents or pH regulators. It ensures a safe and durable connection in your pond system.

The hose has an outer diameter of 40 mm and an inner diameter of 34 mm. This size is sufficient for many pond filter installations and allows for a good flow rate.

Yes, the hose is described as pressure-resistant and is suitable for applications that require a certain pressure. Pay attention to the correct bonding of the fittings for maximum tightness.

Yes, the hose is designed as a suction and pressure hose. Thanks to the smooth inner and outer surface and the plastic spiral, it is well suited for suction operation.

The hose is robust and flexible, underground laying is basically possible. However, to avoid damage from mechanical influences, a protective pipe or sand bed is recommended.

The hose is primarily designed for bonding with PVC fittings to ensure a tight and permanent connection. For pressureless or less critical applications, hose clamps can be used under certain circumstances, but with caution.

The hose is described as pressure-resistant, which makes it suitable for use with irrigation pumps. For permanent installation, the correct bonding of the connections is crucial.

Yes, the PVC Flexschlauch is chemical-resistant and therefore suitable for use in pool installations, including with chlorinated water. Its smooth inner surface minimizes deposits.

For a secure and tight connection of the PVC adhesive hose, you should use a special PVC glue for adhesive fittings. This ensures the required adhesion.

Yes, the hose has a smooth inner surface that minimizes the adhesion of dirt. This makes cleaning easier if deposits should form.

The inner diameter of 34 mm is relevant for the connection. Please check the exact dimensions of your sink drain pipe, as these can vary.

The hose can be easily cut thanks to its flexibility and material. For this, you can use commercially available PVC cutting tools or a fine saw. Pay attention to a clean, straight cut for optimal bonding.

For a long service life, we recommend removing the hose when there is a risk of frost and storing it in a frost-proof place. PVC can lose flexibility at sub-zero temperatures and become brittle.

Yes, the hose has a smooth inner and outer surface. This minimizes the settlement of algae and facilitates cleaning in pond and pool systems.

The PVC adhesive flex hose is chemical-resistant and therefore also suitable for use in saltwater pool systems. The bonding ensures a reliable and tight installation.

The PVC hose is usually delivered in 1-meter sections. If you order 3 meters, you will receive three individual 1-meter pieces.

The flexible hose is very flexible and at the same time dimensionally stable due to its integrated plastic spiral. It does not kink in tight radii during normal installation and thus ensures an undisturbed flow.

The hose is pressure-resistant and reinforced with a plastic spiral, which gives it high stability. It should withstand being stepped on accidentally.

The PVC hose is offered as a meterware. When ordering multiple units, we deliver them, if possible, in one piece.

Yes, the hose is very flexible and can be easily laid in tight radii. The integrated plastic spiral ensures dimensional stability.