Eurokonus Compression Fitting 16mm, 2-Pack Heater & Plumbing

Yes, the connection with 3/4 inch Eurokonus is ideal for connecting to radiator valves or heating circuit distributors. It is intended for heating installations.

No, you do not need any special press or soldering tools for the installation of this fitting. The assembly is simple and straightforward.

Yes, the installation of the Eurokonus fitting is explicitly designed for DIYers. It is safe and straightforward, as no special pressing or soldering tools are required.

Yes, the clamp ring fitting is specifically designed for multilayer composite pipes, PEX pipes, and PE-RT pipes. It ensures a secure connection.

Yes, this Eurokonus screw fitting is suitable for both heating and sanitary applications. It can therefore also be used for hot water pipes.

The 3/4 inch Eurokonus connection is a common standard. It is typically used for radiator valves and heating circuit distributors.

The fitting is specifically designed for multilayer composite pipes, PEX, and PE-RT pipes in the dimension 16x2 mm. It is not directly suitable for copper pipes.

The Eurokonus screw connection is designed for reliable and long-lasting sealing. The integrated O-rings and robust clamping mechanism ensure a long-term secure connection in heating and sanitary systems.

An order of item BONI-42154 contains two compression fittings. With them, you can adapt two pipe ends to a Eurocone connection, for example for two radiator valves.

The screw connection is designed as a detachable joint. You can open it again and reposition or tighten it as needed, providing flexibility during installation.

Yes, the Eurokonus fitting is intended for heating applications and is therefore also suitable for underfloor heating systems with the appropriate pipes.

The fitting has integrated O-rings on the spout, which ensure reliable sealing. Additional sealing materials are usually not required.

The 3/4 inch Eurokonus is a common standard for connecting heating pipes to distributors and radiator valves. It is widely used.

The screw fitting is designed for heating and sanitary applications. It withstands the usual operating temperatures and pressures in modern heating systems.

The compression fitting enables a secure pipe connection through a clamping mechanism. The pipe is inserted into the fitting and tightly clamped by tightening the nut, without soldering or pressing.

For an optimal and tight connection, the pipe ends should be clean, square-cut, and deburred. Calibration of the pipe is recommended according to the manufacturer's recommendation.

This Eurocone fitting is specifically designed for pipes with a dimension of 16 x 2 mm. For 18mm pipes, the component is not suitable.

Yes, this clamping ring fitting is specifically designed for PE-RT pipes with the dimension 16x2 mm. A secure connection is guaranteed.

The fitting is suitable for both application areas, heating and plumbing. It offers a flexible solution.

Yes, the Eurokonus connection is designed as a detachable connection. This allows you to easily make adjustments or repairs.