Hose Connector Plastic Elbow 90° 25 mm

Yes, the connector made of POM plastic has high strength, impact resistance, and is abrasion-resistant. It is robust enough for burial in the ground.

The connector is designed for a maximum pressure of 10 bar and offers high strength. The seal is guaranteed long-term with proper installation and adherence to pressure limits. However, for inaccessible installations, regular visual inspection is not possible.

The connector is designed for a maximum operating pressure of 10 bar. Check if the pressure of your garden pump falls within this range.

The material Polyacetal Copolymer (POM) is cold-resistant down to -40°C. It retains its impact strength and high durability even at low temperatures.

Yes, the hose connector made of POM is a reliable solution even with slight vibrations or movement due to its high strength and impact resistance. It is designed for durable and tight connections.

The connector is designed for operating temperatures from -40°C to +80°C. Short-term (up to 1 hour) it can even withstand +110°C. Therefore, it is suitable for use under roof tiles in summer.

Yes, the connector is designed for a maximum pressure of 10 bar. Ensure the correct sizing of hoses with an internal diameter of 8.0 mm.

Yes, the connector withstands operating temperatures from -40°C to +80°C. Therefore, using it in strong sunlight in summer is safe.

The T-piece is resistant to oils and fats. The operating temperature ranges from -40°C to +80°C, briefly up to +110°C, which is sufficient for many oil circuits.

Yes, the angle connector is designed for a maximum allowable pressure of 10 bar. For most irrigation systems, this should be sufficient.

Yes, the T-piece made of polyacetal copolymer (POM) offers high impact resistance and strength. It is also abrasion-resistant for such applications.

Yes, the hose connector is specifically designed for applications like aquariums and irrigation systems. It provides a secure connection.

Yes, the hose connector made of POM is resistant to alkalis and saline solutions. You can therefore use it for pipes through which corresponding cleaning agents occasionally flow.

Yes, the Y-piece is designed for operating temperatures from -40°C to +80°C. It can also withstand freezing conditions.

The connector is designed for hoses with an inner diameter of 6.0 mm. Please check the inner diameter of your hose.

Yes, the connector is designed for operating temperatures from -40°C to +80°C. It can therefore remain outside in winter during frost.

The connector is not resistant to acids. Therefore, using it with acidic fertilizer water is not recommended.

Yes, this hose connector is specifically designed for hoses with an inner diameter of 4.0 mm. It is therefore ideal for drip irrigation systems.

If the hoses of your filtration system have an inner diameter of 4.0 mm and the pressure does not exceed 10 bar, the T-piece is suitable. The material is resistant to neutral salt solutions.

Yes, the T-piece made of POM is designed for operating temperatures from -40°C to +80°C. Therefore, it is well-suited for use at 75°C.

Yes, the T-piece withstands operating temperatures from -40°C to +80°C. Functionality is ensured even in direct sunlight during summer.

For hoses with a 4 mm inner diameter, additional hose clamps are often not necessary at low pressure. The hoses are simply pushed onto the connector's barbs.

The T-piece is designed for a maximum allowable pressure of 10 bar. It can therefore withstand the pressure of a small pump in irrigation systems.

No, the material Polyacetal Copolymer (POM) is not resistant to glycol. Many antifreeze products contain glycol, so this use is not recommended.

Yes, the hose connector is resistant to oils and fats. Therefore, it can be used for motor oil lines.

Yes, the connector is resistant to hydrocarbons, gasoline, and diesel. It can therefore also be used for a small fueling station.

Yes, the hose connector is characterized by its high strength, impact resistance, and abrasion resistance. It is robust enough for use in a workshop environment.

The hose connector made of POM is resistant to alkalis and neutral salt solutions. Therefore, it is possible to use it with neutral soap solutions or mild alkalis.

The material POM is unstable against oxidizing agents and acids. Caution is advised with heavily contaminated or algae water that may contain these substances.

The hose connector is designed for a permanent operating temperature of up to +80°C. Temperatures of 85°C are only permissible for short periods (up to 1 hour) at a maximum of +110°C. It is not recommended for permanent use at 85°C.