Hose Connector Plastic Double Nipple 3/4"

Yes, the double nipple is intended for pool construction and offers a chemical-resistant solution. Thus, it is also suitable for water containing chlorine.

Yes, the double nipple can be screwed onto metallic components with a matching 2-inch internal thread. It is recommended to use a suitable sealant such as Teflon tape or hemp.

The double nipple allows for an easy and professional connection of your pipe systems. The installation is straightforward and requires no special tools beyond screwing it in.

The 2 inch size of the double nipple is a nominal size and offers a large inner diameter. This enables a high flow rate, which is particularly advantageous for pond pumps for good circulation.

Yes, the double nipple made of PVC-U is robust and versatile, including in domestic wastewater pipes. Its durability and chemical resistance speak for it.

For a tight threaded connection, you should use suitable sealing material such as hemp with sealing paste or Teflon tape. Make sure to tighten the nipple firmly, but not excessively.

The fitting is robust and suitable for pool construction, which includes outdoor use. It offers a durable and reliable connection under demanding conditions.

Yes, the double nipple is made of robust hard PVC and is chemical-resistant. Therefore, it can also be used in the ground for drainage pipes, but should be protected from mechanical damage.

For the bonding, you usually need a saw to cut the pipes, a deburrer and a cleaner for the bonding points. Special tools are not required.

PVC-U fittings are primarily designed for liquid media. They are generally not approved for compressed air lines under high pressure, and special compressed air systems should be used.

With careful screwing on and off, the double nipple made of hard PVC can withstand several disassemblies. Pay attention to correct thread care and renew the sealant if necessary.

Yes, the fitting is chemical-resistant and explicitly suitable for aquariums. It can therefore also withstand saltwater.

Yes, the double nipple is made of hard PVC (PVC-U), which has high UV resistance. It is suitable for permanent outdoor use, such as in pool construction.

The double nipple can be used for vacuum lines in the low-pressure range. Professional installation with sealants is crucial for tightness.

The PVC-U AG x AG double nipple is provided with an external thread (AG) on both sides. It is screwed and not glued to create a connection.

Yes, the double nipple is made of chemical-resistant hard PVC (PVC-U). It is suitable for use with a variety of acids and alkalis in industrial plants.

The double nipple is designed for use in pool construction, aquariums and industrial plants. An explicit certification for drinking water pipes is not listed in the product data.

The double nipple made of PVC-U is designed for applications up to a certain temperature, which is usually sufficient for outdoor use in summer. However, direct, permanent sunlight can lead to material fatigue in the long run.

The double nipple made of hard PVC is robust and chemical-resistant. Permanent installation in the ground is possible, provided there is no extreme mechanical stress.

No, PVC-U fittings are not intended for hot water applications. They are primarily designed for cold water and temperature applications up to approx. 45-60 °C.

Yes, the double nipple is made of hard PVC (PVC-U), is chemical-resistant and was designed for use in industrial plants.

Yes, the PVC-U double nipple is chemical-resistant and suitable for use in industrial plants, which also includes resistance to acidic and alkaline solutions.

The ISO 9001 certification ensures the highest quality standards in production. For you, this means a durable and reliable connection that also holds up under demanding conditions.

The PVC-U double nipple is designed for use in aquariums and other demanding environments. Thanks to the robust material and professional connection technology, it offers reliable tightness even with slight vibrations.

The BONI-08320 is explicitly intended for use in industrial plants and is ISO 9001 certified. It is therefore also suitable for commercial and professional applications.

The double nipple is screwable and therefore can be disassembled again in principle. With correct assembly and the use of sealants, it can usually be reused.

For a permanently tight threaded connection, the use of a suitable sealant such as PTFE tape (Teflon tape) or sealing thread is essential. Only in this way will the connection be reliably sealed.

The double nipple itself has a fixed size of 2 inches. To connect it to pipes of other diameters, you will need appropriate reducers or adapters with suitable threads.