Floating Suction Hose Kit, 1 Inch, 2m - Complete Water Intake Set

Yes, thanks to the flexible PVC material with a plastic spiral, the hose can also be laid well in narrow areas. The 2-meter length supports handling in confined spaces.

Yes, the set is excellent for pumping water from an IBC container. The floating intake ensures clean water extraction from the upper part of the container.

The foot valve is designed to retain larger dirt particles and prevent the suction of sludge. Unfortunately, we do not have information on the maximum particle size.

The set is equipped with a PVC hose with a plastic spiral, which gives it good robustness. Light contact with rough surfaces is unproblematic, but should not rub permanently.

Yes, the set is designed as a complete solution with brass double nipple and hose clamps. It can be quickly and easily mounted on most pumps with a 1-inch connection.

The set is designed for 1-inch connections as standard and contains a brass double nipple. For a 3/4 inch pump you will need an additional reducing adapter (not included).

Yes, the set is a complete solution and contains all the necessary components for immediate connection to a pump. These include a brass double nipple, a foot valve, and stainless steel hose clamps.

The floating intake positions the foot valve below the water surface, but above the bottom. This helps to suck in clean water, even at low water levels.

The set is designed for outdoor use and offers a robust solution. However, for maximum service life, it is recommended that the set be stored in a protected place when not in use for extended periods or under extreme weather conditions.

Yes, the integrated plastic spiral makes the hose very kink-proof. It also retains its shape well when rolling up and unrolling and allows for an unhindered water flow.

The PVC hose with plastic spiral is robust and flexible. It's easy to lay and is resistant to kinks.

Yes, for a well of 1.5m depth, the 2-meter hose length of the set should be sufficient. The foot valve can thus be optimally positioned in the water.

The PVC material of the hose is suitable for contact with normal pool water (chlorinated). However, long-term storage in a highly concentrated chlorine solution should be avoided.

Yes, the hose diameter is 1 inch (25mm). The set is therefore compatible with pumps and connections that are also designed for 1-inch hoses.

The foot valve is designed to affect the flow as little as possible. The 1-inch diameter of the hose is generally suitable for good flow rates.

The foot valve is directly connected to the floating extraction. A separate adjustment of the suction depth by removing the valve from the buoy is not provided for in this set.

Yes, the hose is designed as a suction and pressure hose. It is equally suitable for sucking up water and for conveying it under pressure, for example for irrigation purposes.

The set should be completely emptied and stored dry before the first frost. This prevents frost damage to the hose material and the metal components.

The hose material is designed for water transport in the garden. No taste of the water is to be expected during normal use, but it is not a drinking water hose.

Yes, the floating intake positions the foot valve below the water surface, but above the bottom. This helps to minimize the suction of sludge and coarse particles.