Suction Hose Kit with Floating Intake - 1 inch, 3 Meter

Yes, the 3-meter length of the hose is sufficient to pump water from a depth of 2.5 meters. The set thus offers about 0.5 meters of leeway for the pump above the water level.

The floating extraction is designed to suck water just below the surface to avoid sediment. It works optimally in water depths that leave enough space for the float.

The set is designed for water transport in pools and can therefore withstand contact with slightly chlorinated water. Rinse the hose with clear water after use to remove any residue.

The suction hose set is designed for irrigation and water transport in the garden, pond and pool. Suitability for drinking water is not certified or indicated in the product description.

The set is designed for a working pressure of up to 6 bar. In combination with a suitable pump, this pressure is easily sufficient to water flower boxes from an elevated rain barrel.

The set comes with a 1 inch double nipple. If your pump has a suitable 1 inch female thread connection, you do not need an additional adapter.

No, the hose should be stored frost-free and dry in winter. PVC can become brittle at sub-zero temperatures and be damaged.

Yes, the set can be connected to a domestic waterworks, provided that it offers a suitable 1-inch connection for the double nipple. The 6 bar working pressure is sufficient for this.

Yes, the floating extraction is also suitable for shallower ponds with a depth of about 50 cm. It ensures that the set extracts clean water from the surface and avoids bottom deposits.

Yes, the hose is suitable for both suction and pressure applications. You can connect it to a suitable submersible pump with a 1-inch connection.

Yes, the integrated plastic spiral gives the hose a high degree of dimensional stability. This significantly reduces the risk of kinking and constrictions during operation.

The set can stay in the water permanently, the materials are robust. However, it is advisable to remove it from the pool when not in use to extend its lifespan.

Yes, the set is equipped with a 1 inch double nipple and can therefore be connected directly to most standard garden pumps. A floating extraction is included for the suction side.

Yes, the floating intake prevents the suction of dirt and mud from the pond bottom. This keeps the water clearer and protects your pump.

Yes, the set is designed to be easy to install. All necessary components are included and can be connected directly.

Yes, the suction hose set is specially designed for use with surface pumps for water supply in the garden, pond or pool. The 1 inch double nipple fits most pumps.

The suction hose set is supplied as a complete system and includes all the necessary components for water supply. Clamps for additional attachment of the hose to the pump are usually not included separately.

The hose is designed for a working pressure of up to 6 bar. This is perfectly sufficient for most common lawn sprinklers and irrigation systems.

Yes, the set is ideal for taking water from a pool for watering. The floating extraction ensures that clean water is sucked from the surface without stirring up the bottom.

The PVC material with plastic spiral is robust and designed for outdoor use. However, for maximum durability with permanent, intense sunlight, we recommend storing the set in a protected place when not in use.

Yes, the hose is designed as a suction and pressure hose. You can use it to drain water from the rain barrel, provided there is a suitable pump or drain connection.

Yes, the set is suitable for pumping water from a cistern, as long as it is clear or slightly contaminated water. The floating intake helps to avoid coarse sediments.

The hose is made of PVC with a plastic spiral, which gives it good flexibility while maintaining high dimensional stability. It can be easily laid around corners without kinking severely.

The floating extraction of the set is designed to suck water just below the surface. This reduces the intake of bottom sediments and coarse dirt, even in a stream.

The supplied double nipple has a 1 inch threaded connection. It is used for easy and safe connection of the suction hose to the corresponding inlet of your garden pump.

Yes, the floating intake minimizes the suction of dirt particles and sediments from the bottom. This protects your pump from contamination and can significantly increase its lifespan.

Yes, the 3-meter hose length is sufficient in this scenario to suck water out of an IBC container that is directly next to it. Pay attention to a free positioning of the floating extraction in the container.

Yes, the set is suitable for use in automated irrigation systems, as it offers a stable working pressure of 6 bar. Pay attention to the compatibility of the double nipple with your timer/pump.