Flexible Garden Edging - Recycled Plastic Lawn Border, 4.5cm x 80cm, Black

The lawn edge of 4.5 cm is approx. 80 cm long per piece. For 10 meters of bed edging you will need 13 pieces of these edges (roughly calculated: 10 m divided by 0.8 m equals 12.5, rounded up to 13 pieces).

Yes, the lawn edge is robustly built with an additional strut and a wall thickness of 6 mm. Occasional stepping is no problem, without it breaking or losing its shape.

Yes, the lawn edge offers extra stability thanks to its additional bracing. For sandy or loose surfaces, we recommend placing the fixing nails close together; up to 5 pieces per meter are possible depending on the need.

The lawn edge is designed so that it does not interfere with mowing. You can maintain your lawns as usual.

Yes, the additional strut and the 6 mm wall thickness give the edge extra stability. It is well suited to delimit slightly raised beds or areas.

The lawn edge is designed for a wide temperature range from -50 to +90°C, which ensures high resistance even in direct sunlight. It is made of robust recycled plastic.

The lawn edge is very temperature-resistant and withstands temperatures from -50 to +90°C. It also remains flexible in severe frost and does not become brittle.

Yes, this lawn edging is made of 100% recycled plastic, is free of heavy metals and is declared environmentally neutral. It can be used without hesitation in your natural garden.

Yes, the edge is easy to bend and retains its shape once it is anchored in the substrate with the recommended fixing nails. The additional bracing supports the stability in the desired shape.

Yes, the lawn edging is ideally suited to cleanly separate lawn or gravel areas from each other.

The 4.5 cm high lawn edge weighs approx. 0.39 kg per piece, which is very light. The laying is easy and should also be easy to manage on your own.

The lawn edge is made of 100% recycled plastic. It is also free of heavy metals and environmentally neutral.

Yes, the lawn edge is very robust and temperature-resistant from -50 to +90°C. It can easily remain outdoors all year round, even in snow and ice.

The edge can be easily bent for curves or round motifs. For particularly tight radii, the additional bracing can be cut with garden shears if necessary to adjust the shape.

Yes, due to the robust recycled plastic and the temperature resistance of -50 to +90°C, the lawn edge is very resistant. It can be easily cleaned with a pressure washer.

The lawn edge has a height of 4.5 cm and is well suited for bordering lawn and bed areas. It can be installed in such a way that it visually compensates for slight height differences. The fixing in the ground ensures stability.

This lawn edge is also suitable for bordering in slight slopes. Its stability and the possibility of fixing with nails help to reliably hold materials such as gravel and prevent slipping.

For a stable fixing of the lawn edge, we recommend up to 5 fixing nails per meter. The exact number may vary depending on the surface and application (roughly calculated: 10 meters of edge require up to 50 nails).

The lawn edge offers extra stability thanks to its additional bracing and has a wall thickness of 6mm and a base width of 80mm. It is robust enough for the boundary next to paving stones.

Yes, the material is 100% recycled plastic, free of heavy metals and environmentally neutral. It poses no health risk, even if children play in the garden.

The edge has a height of 4.5 cm. It can be sunk variably deep into the ground to make it as unobtrusive as possible. Make sure it still finds sufficient support and can be fixed if necessary.

The lawn edging is designed to be easy to install. You can use garden shears, pliers, or a hand saw to shorten it. Our matching fixing nails are necessary for fixing.

The height of the lawn edge is 4.5 cm. Depending on how deep it is set into the ground, it will stand correspondingly high above the surface.

The lawn edging is extremely temperature-resistant and can withstand temperatures from -50 to +90°C. This makes it suitable for all seasons in the garden.

Yes, the edge can be bent into the desired shape. For exact angles or corners, the bracing can be easily cut with a hand saw or pliers to facilitate adjustment.

The 4.5 cm high edge is particularly discreet and unobtrusive. It is ideal for a subtle demarcation of lawn and gravel areas without dominating the landscape.

Yes, the edge can be shortened easily and quickly. You can use garden shears, pliers, or a hand saw for this.

Yes, the edge does not interfere with mowing and is resistant due to its 6 mm wall thickness and the robust, recycled plastic material. A light contact with the weed wacker should not harm it.

The lawn edges are simply placed next to each other. Then fix the end areas of each edge as well as the connection points with the fixing nails in the ground.

The lawn edge has an additional strut that gives it extra stability. In addition, the wall thickness of 6mm contributes to the robustness.