Black Lawn Edging, Garden Edging, 8 cm x 100 cm, Plastic Lawn Edging

"Environmentally neutral" means that the lawn edging is made from 100% recycled plastic, is free of heavy metals, and is itself 100% recyclable, so it doesn't pollute the environment.

Yes, the lawn edging is extremely temperature-resistant from -50 to +90°C. It can therefore remain outdoors permanently without the material properties being affected.

For an area of 12 meters, you need at least 12 pieces of the lawn edge, as each element is 100 cm (1 meter) long. It is advisable to plan one or two additional pieces for possible cuts.

Thanks to the 6 mm wall thickness and the additional bracing, the lawn edge is very stable. A slight compaction of paving stones should not damage the edge, especially if it is well fixed.

Up to 5 fixing nails per meter are recommended, depending on the surface and the desired shape. The fixing nails are sold separately and are not included. So for a 10-meter section, up to 50 nails are needed.

Yes, the lawn edging is made of 100% recycled plastic, is free of heavy metals and can be 100% recycled itself, making it very environmentally neutral.

No, the lawn edging is very temperature-resistant and retains its shape at temperatures from -50°C to +90°C. Even in strong sunlight, it remains dimensionally stable and does not warp.

The base width of 80 mm ensures good stability in the ground. A specially wide trench is not necessary for this, as the edge is designed for easy laying and is additionally secured with fixing nails.

The lawn edge is designed so that it doesn't get in the way when mowing the lawn and allows for a clean result without the need for separate trimming of the edges.

The lawn edge has an additional strut that gives it good stability. For straight stretches on solid ground, less than the maximum recommended 5 fixing nails per meter are often sufficient to ensure a secure hold.

Yes, the lawn edge can be bent easily and is ideal for curves or round motifs in the garden. The additional strut can be cut if necessary to allow for narrower shapes.

The lawn edging can be bent into the desired shape by simply severing the additional bracing. This allows flexibility for curves and round motifs in both directions.

With a wall thickness of 6 mm and a base width of 80 mm, the lawn edging offers good stability. The additional bracing further reinforces this, ideal for sidewalk edges.

Special fixing nails are recommended for this lawn edging, as they are optimized for the substrate. These nails are available separately, up to 5 pieces per meter may be required depending on the substrate.

Yes, the lawn edging is very stable thanks to its additional bracing and 6 mm wall thickness. It can withstand normal loads such as occasional stepping on it.

The 8 cm high lawn edge is well suited for the visual demarcation of beds. For shallow-rooted perennials, it can serve as a barrier. However, with strong or deep-rooting plants, it should be noted that the edge is not designed as a deep root barrier.

Yes, the integrated profile of the lawn edge is not only suitable for drip lines, but can also be used for other smaller lines, such as cables for garden lighting.

For uneven or softer surfaces, we recommend using up to 5 fixing nails per meter of the lawn edge. The nails are available separately.

Yes, the lawn edging is specially designed to combine ideally with our RKP6 lawn grids. They complement each other perfectly for a stable and visually appealing area border.

Yes, this lawn edge is designed so that it does not interfere with mowing. This also applies to most robotic lawnmowers, as the edge can be laid flush with the ground.

Yes, the lawn edging is easy to install, and bending it for curves is also possible without much effort. Separate fixing nails are required for fixing to ensure a secure hold.

Simple tools like garden shears, pliers, or a hand saw are suitable for shortening or adjusting the lawn edge.

The lawn edge is made of recycled plastic and has no sharp edges. No special protective clothing is required for easy installation.

The 8 cm height of the lawn edging allows for both a completely recessed installation and one in which a part remains visible. However, for optimal stability and to avoid hindering mowing, we recommend a largely flush installation.

Yes, the edge is easy to bend for curves or round motifs. For very tight radii, you can simply cut the additional struts with garden shears or a hand saw.

For sharp 90-degree corners, it is recommended to cut the edge at the desired point with garden shears or a hand saw. This allows the shape to be precisely adjusted. Bending is more intended for gentle curves and round motifs.

The lawn edge is designed not to interfere with mowing. Thanks to its wall thickness of 6 mm and the robust construction, it is resistant to light contact with the mower.

Yes, the edge is designed so that it does not interfere with mowing. It can be installed flush with the lawn.

Yes, the lawn edging is ideal for cleanly delimiting split surfaces. It creates a clear separation and prevents mixing with other areas.

Yes, the lawn edge has a special profile that allows for the unobtrusive laying of a drip line or other small lines.