38mm PVC Hose Fitting with Nut, 2 Inch Threaded Hose Connector

Yes, an inner diameter of 1 1/2 inches corresponds to approximately 38.1 mm. The hose connector with 38 mm therefore fits perfectly for common pond hoses of this size.

Yes, the PVC-U material of the connector has good chemical resistance. It can therefore also be used for slightly acidic liquids.

The connector made of PVC-U is robust and chemically resistant. For permanent installation in the ground, you should additionally protect it from mechanical stress and sharp edges.

Yes, the hard PVC material of the connector is particularly durable. It is stable enough for frequent assembly and disassembly at the pond.

Yes, the connector is well suited for connecting a suction basket. The 2-inch union nut fits many pump connections, and the 38mm spigot is ideal for suction hoses.

The connector is explicitly intended for hoses with an inner diameter of 38 mm. A secure and tight connection with smaller hoses cannot be guaranteed.

The connector is made of particularly durable hard PVC. It withstands the usual water pressure from garden and pond pumps.

Yes, the spout is made of PVC-U with good chemical resistance. Therefore, use with gray water from washing machines or for drainage systems is generally safe.

The connector is weatherproof. However, to avoid frost damage caused by freezing water, it should be stored frost-free over the winter.

Yes, the PVC-U material of the hose connector is characterized by good chemical resistance. This includes use with chlorine-containing water, as found in pool filter systems.

The PVC-U material is suitable for normal water temperatures in the garden. For temperatures significantly above 40°C, suitability should be checked individually.

The hard PVC (PVC-U) used is resistant to weathering. However, long-term, intensive UV radiation can lead to slight discoloration or a certain material fatigue over the years.

The union nut of the hose connector allows screwing with a fixed connection without having to rotate the connected hose. This greatly simplifies assembly, especially in confined spaces.

The PVC-U material is weatherproof and durable. Basically, the connector can remain outdoors all year round without quickly getting damaged.

Yes, the union nut of the connector has a 2-inch female thread. It is therefore suitable for connections with a 2-inch male thread on your pond filter.

The union nut is designed for easy installation. It can usually be tightened sufficiently by hand to ensure a tight connection.

The connector is robustly built, but with very frequent loosening and tightening of the union nut, the correct tightening torque should be observed. Excessive tightening can strain the thread over time.

Yes, due to the good chemical resistance of the PVC-U material, the connector is also suitable for use in wastewater pipes in the garden. Pay attention to the appropriate diameters.

The nozzle is designed for hoses with an inner diameter of 38 mm. A suitable suction hose can be securely attached with a hose clamp.

For a secure and pressure-resistant connection of the 38mm hose, the use of a suitable hose clamp is strongly recommended. Without a clamp, the tightness and pressure resistance cannot be guaranteed.