Stainless Steel Reducing Coupling 2" x 1 1/2" Female Threaded

Yes, the thread is a common Whitworth pipe thread in water technology. It is compatible with most standard fittings and connections.

The fitting is approved for temperatures from -20 °C to +200 °C. It can therefore also be used in freezing temperatures, as long as there is no standing water that freezes.

Yes, the reducer is made of stainless steel 316, which is rust-proof and corrosion-resistant. It is ideal for permanent outdoor use and garden irrigation.

The fitting is designed for a working pressure of up to 10 bar. Check the pressure of your high-pressure cleaner; this value should not exceed 10 bar.

Yes, the reducing coupling is specifically designed to connect pipelines with different internal thread sizes. It has a 3/4" internal thread on one side and a 1/2" internal thread on the other side.

The thread requires additional sealing. We recommend using suitable thread sealing material such as hemp or Teflon tape to ensure a permanent seal.

The coupling is made of stainless steel 316 (V4A), which has good resistance to many chemicals. For specific chemical applications, you should check the material compatibility with the respective chemicals.

Yes, stainless steel 316 (V4A) is known for its high corrosion resistance, especially against chlorides. This material is therefore suitable for saltwater applications.

Yes, the reducer fitting is specifically designed to reduce a 3/4" internal thread connection to a 1/2" internal thread. This way you can connect a 1/2" connection to your 3/4" line.

Yes, the fitting is made of corrosion-resistant stainless steel 316 (V4A) and is suitable for water technology. It meets the requirements for drinking water installations.

Yes, the sleeve is designed for a working pressure of up to 10 bar. For higher pressures, the fitting would not be suitable.

The threaded fitting is made of stainless steel 316 (V4A) and is therefore very durable and corrosion-resistant. Permanent installation in the ground is possible, provided there are no aggressive soil chemicals.

Yes, the sleeve is designed for temperatures from -20 °C to +200 °C and is made of V4A stainless steel. It can therefore remain outdoors even in frost.

Yes, the fitting is approved for a temperature range of -20 °C to +200 °C. It is therefore suitable for the usual operating temperatures in solar systems.

Yes, the reducing sleeve made of stainless steel 316 (V4A) is rust-free and corrosion-resistant. It retains its quality even with prolonged contact with rainwater.

Yes, the reducing sleeve is designed for temperatures from -20 °C to +200 °C. It can therefore be used without problems in heating circuits.

The sleeve is made of stainless steel 316 (V4A), which has high resistance. Whether it is suitable for specific chemical solutions depends on the type and concentration of the chemicals.

The coupling is made of stainless steel 316 (V4A), making it rust-free and corrosion-resistant. It is therefore also well suited for use with saltwater.

Yes, the Whitworth pipe thread is the standard thread in water technology. The sleeve is compatible with standard water installations.

For thread sealing, regular hemp or Teflon tape works very well. Special tools beyond the usual plumbing tools are not required.

Yes, the coupling made of stainless steel 316 (V4A) is rust-free, corrosion-resistant, and approved for temperatures from -20 °C to +200 °C. It can be used without concern in rainwater cisterns.

Yes, the reducing sleeve made of stainless steel 316 (V4A) is designed for use in water technology. Therefore, it can also be used for drinking water installations.

Yes, the fitting is designed for working pressures up to 10 bar. A pump with 9 bar is therefore not a problem.

The coupling is made of stainless steel 316 (V4A), therefore rust-free and corrosion-resistant. It is durable and ideal for continuous use in garden irrigation.

Yes, this reducing coupling is specifically designed to reduce a 1 1/2" internal thread to a 1" internal thread. It is ideal for your purpose.

Yes, the reducer coupling is designed for working pressures up to 10 bar and temperatures from -20 °C to +200 °C. It is therefore suitable for your heating system.

Yes, the reducing sleeve is designed for water temperatures from -20 °C to +200 °C. It can therefore be used without hesitation in hot water pipes.

Yes, for a tight connection, a suitable thread sealant is absolutely necessary. You can use hemp or Teflon tape.

Yes, due to the corrosion-resistant V4A stainless steel, the fitting is also suitable for underground installation. Proper sealing of the threads is particularly important.

No, sealing the thread always requires suitable sealing material. We recommend using hemp or Teflon tape to ensure reliable tightness.