Stainless Steel Reducing Nipple, Threaded Pipe Reducer Fitting, 2" x 1 1/2"

The nipple is designed for a temperature range of -20 °C to +200 °C. It can therefore remain outdoors even in winter temperatures.

Yes, the reducer nipple is made of stainless steel 316 (V4A), which is considered rust-free and permanently corrosion-resistant. It is therefore also suitable for use with saltwater.

Yes, the double nipple is ideal for garden irrigation systems as it is robust and chemical-resistant.

The double nipple made of hard PVC is resistant to a variety of chemicals and is suitable for plant construction. For special media in the industrial sector, we recommend a prior check of the chemical resistance.

Yes, this stainless steel fitting can be easily removed, unlike welded or press fittings. This allows flexibility during modifications.

The external threads of this reducing nipple are tapered. During installation, it is particularly important to pay attention to proper sealing with suitable thread sealing material such as hemp or PTFE tape to ensure a reliable connection.

Stainless steel 316 (V4A) is highly corrosion-resistant and therefore well-suited for media with chemical additives like fertilizer. It is more resilient than many other materials.

Absolutely, this threaded fitting is ideal for garden irrigation systems. Its rust resistance and durability are major advantages.

The thread needs to be additionally sealed with a suitable sealing material. Hemp or Teflon tape are suitable for this.

Yes, the threads are manufactured according to common standards and allow for a seamless transition to other pipe materials. A special transition fitting is not necessary.

Stainless steel 316 is rust-free, corrosion-resistant, and more durable than PVC, especially under UV radiation and temperature fluctuations. It offers higher mechanical stability and temperature resistance.

Yes, the reducer nipple is made of stainless steel 316 (V4A), which is rust-free and highly corrosion-resistant. It is durable and withstands slightly acidic rainwater over long periods.

Yes, the reducer nipple is explicitly suitable for both cold and hot water applications. Its temperature resistance goes up to +200 °C.

Yes, the threads of this fitting are designed to allow a seamless transition to other pipe materials. A separate transition fitting is not necessary.

Yes, the reducing nipple is designed for a working pressure of up to 10 bar. This is fully sufficient for most common pumps and irrigation systems.

Yes, unlike welded or press fittings, this stainless steel threaded fitting can be disassembled and reused at any time. Only the sealing material needs to be replaced.

Yes, the stainless steel fittings are designed to allow a seamless transition to other materials. Pay attention to the correct thread sizes of 2 inches and 1 1/4 inches.

The reducer nipple is stainless, corrosion-resistant, and durable, making it ideal for permanent use. It is suitable for cold and hot water as well as pressures up to 10 bar.

The nipple has conical external threads and requires suitable thread sealing material such as hemp or PTFE tape. A flat seal is not intended for this thread type.

The threaded fitting is made of stainless steel 316 (V4A), a material commonly used in water technology. For specific drinking water approvals, please check local regulations.

Yes, the reducer is suitable for both cold and hot water. It withstands temperatures from -20 °C to +200 °C.

Yes, the stainless steel fittings allow for a seamless transition to other materials without the need for a separate transition fitting.

The threaded fitting is designed for a working pressure of up to 10 bar. This is a technical value that confirms the material's pressure resistance.

Yes, the reducing nipple is designed for pressure ranges up to 10 bar. It can therefore also be used in systems with higher operating pressure.

For thread sealing, you need a suitable material like hemp or PTFE thread sealing tape. The external threads are tapered and require careful sealing.

Yes, the stainless steel fittings are designed to be loosened again, unlike welded or press fittings. This allows flexibility for changes.

The threaded fitting is primarily designed for water technology. The description does not explicitly state it for gas installations.

The reducing nipple is designed for a wide temperature range from -20 °C to +200 °C. Even in the blazing sun in summer, it will not reach these extreme values and will function without any issues.

Yes, this reducing nipple allows for a seamless transition to other materials and sizes. The threads are made to common standards.

Yes, this reducing nipple is specifically designed to connect a 1-inch hose to a 3/4-inch hose. The double-sided external threads allow for a direct transition between these sizes.