1/2 Inch Stainless Steel Pipe Nipple, 150mm, V4A, Threaded Fitting

The stainless steel pipe nipple is designed for temperatures from -20°C to +200°C. Therefore, use in a solar system up to 150°C is entirely possible.

Yes, stainless steel 316 (V4A) is highly corrosion-resistant and therefore very well suited for use in saltwater environments. It provides long-lasting protection.

Yes, this nipple is designed for a working pressure of up to 16 bar. A pressure line with 10 bar is therefore easily possible and within the specifications.

Yes, the material stainless steel 316 (V4A) is approved for drinking water installations and is health-safe. Ensure suitable sealing material for thread sealing.

The nipple has a total length of 150 mm. It is therefore very suitable as an extension or connecting element for a gap of 10 cm.

Yes, the stainless steel pipe nipple is rust- and corrosion-resistant and very suitable for cold water outdoors. Ensure proper sealing of the thread with sealing material.

Yes, the nipple is designed to be opened and reused after sealing. Unlike welded or press fittings, it is not permanently fixed.

Yes, thanks to the material stainless steel 316 (V4A), the nipple is rust-free and corrosion-resistant. It can be used permanently outdoors without any concerns.

For the threaded connection itself, you will need suitable sealing material like hemp or Teflon tape. The threads allow a tight seal with the right sealing material.

Yes, the nipple is approved for temperature ranges from -20 °C to +200 °C. Therefore, it is possible to use it in frosty temperatures during winter.

Yes, the stainless steel threads of the nipple allow for a seamless transition to other materials like copper or plastic. You only need the appropriate counterparts with internal threads.

Yes, the nipple is designed for temperatures from -20 °C to +200 °C. It can therefore be used without any problems in hot water lines with temperatures up to 120°C.

Yes, the threads of the nipple allow for a seamless transition to other materials. You can use this nipple to connect directly from a stainless steel pipe to a plastic pipe.

Yes, the 1/2" nipple has a Whitworth pipe thread according to common standards. It thus fits most commercial faucets and valves with a corresponding 1/2 inch internal thread.

Yes, this nipple is made with Whitworth pipe threads according to ISO 7-1/EN 10226-1. These are the standard for many water pipes, including old cast iron pipes, provided the thread is suitable.

The pipe nipple is suitable for sanitary installations and is used to convey liquids. An explicit certification for drinking water is not mentioned in the product description.

No special tools are needed for the installation of the nipple. Standard installation tools like pipe wrenches and the appropriate thread sealing material (e.g., Teflon tape or hemp) are sufficient.

This nipple has double-sided 2" external threads and a total length of 120 mm (12 cm). It can connect two matching 2" internal threads and bridge an 8 cm gap well.

Yes, the nipple can easily withstand an operating pressure of 15 bar. The maximum operating pressure is 20 bar.

Yes, the pipe nipple is designed for a maximum operating pressure of 20 bar. Permanent use under 15 bar is therefore possible without any issues.

Yes, the pipe nipple is suitable for use with hot liquids and withstands operating temperatures of up to 180°C. Ensure a temperature-resistant thread seal.

Yes, the pipe nipple can also be used for gas installation. The areas of application expressly include gas installations as well as industrial plant construction.

Yes, the nipple is safe for an operating pressure of 15 bar. The maximum operating pressure of the fitting is 20 bar.

Yes, the nipple is designed for maximum operating temperatures of 180°C. It can therefore be used without problems in hot water installations or similar applications.

For a secure seal of the thread, the additional use of a suitable thread sealing material, such as hemp or Teflon tape, is required. The external threads are conical and manufactured according to the Whitworth pipe thread standard.

With a total length of 150 mm (external thread to external thread), this nipple is well suited for bridging medium distances. Note that the threads at both ends still need sealing material and insertion depth.

The stainless steel pipe nipple is designed for temperatures down to -20 °C. It can therefore also be used outdoors in winter.

Yes, the threaded fitting can also be used in refrigeration and air conditioning systems. The temperature resistance up to 180°C means that even very low temperatures are not a problem.

The pipe nipple is designed for temperatures up to 180°C. Therefore, it permanently withstands 80°C water temperature in a circulation pipe.

Yes, the galvanized pipe nipple is explicitly suitable for gas installations. It can be used at pressures up to 20 bar and temperatures up to 180°C.