1/2 Inch Stainless Steel Pipe Nipple, 200mm V4A Fitting

The stainless steel pipe nipple is designed for temperatures down to -20 °C. It can therefore also be used outdoors in winter.

The nipple is durable and designed for pressures up to 16 bar. With properly sealed conical external thread, it should handle slight vibrations well.

Yes, the nipple is suitable for such applications. It withstands temperatures from -20 °C to +200 °C and is corrosion-resistant, even with antifreeze and pressures up to 16 bar.

The nipple is designed for a working pressure of up to 16 bar. For air pressure lines, however, the compatibility of the thread seal material with air should be checked.

The stainless steel pipe nipple allows a seamless transition to other materials without the need for a special transition fitting. You can directly connect different pipes.

The nipple is made of stainless steel 316 (V4A), which is very corrosion-resistant. V4A is generally well-suited for chlorinated water applications, please check the thread seal.

Yes, this type of stainless steel fitting, unlike welded or press fittings, can be disassembled again. This allows for flexible modifications or maintenance work.

Yes, stainless steel 316 (V4A) is suitable for drinking water pipes. Ensure a thread seal approved for drinking water.

Yes, the 200 mm long nipple is ideal for bridging a distance of about 15 cm. Keep in mind that you will still need thread length on both sides for screwing and sealing.

Yes, the stainless steel pipe nipple 316 is very durable and can be reused without any problems. It can also be unscrewed after prolonged use and used for new installations.

Yes, the pipe nipple is made of stainless and corrosion-resistant steel 316 (V4A). It is well-suited for permanent use in moist environments, such as garden irrigation.

Yes, the nipple is approved for hot water up to 200 °C and is made of corrosion-resistant V4A stainless steel, making it well-suited for heating systems.

For sealing the thread, you can use suitable sealing material like hemp or Teflon tape. A special sealant is not strictly necessary.

Yes, the nipple can withstand pressures up to 16 bar and is therefore suitable for domestic water systems that typically operate around 6 bar. The threads must always be sealed with a suitable material like hemp or Teflon tape.

Yes, this nipple is made with Whitworth pipe threads according to ISO 7-1/EN 10226-1. These are the standard for many water pipes, including old cast iron pipes, provided the thread is suitable.

The pipe nipple is suitable for sanitary installations and is used to convey liquids. An explicit certification for drinking water is not mentioned in the product description.

The stainless steel pipe nipple is designed for temperatures from -20°C to +200°C. Therefore, use in a solar system up to 150°C is entirely possible.

No special tools are needed for the installation of the nipple. Standard installation tools like pipe wrenches and the appropriate thread sealing material (e.g., Teflon tape or hemp) are sufficient.

This nipple has double-sided 2" external threads and a total length of 120 mm (12 cm). It can connect two matching 2" internal threads and bridge an 8 cm gap well.

Yes, the nipple can easily withstand an operating pressure of 15 bar. The maximum operating pressure is 20 bar.

Yes, the pipe nipple is designed for a maximum operating pressure of 20 bar. Permanent use under 15 bar is therefore possible without any issues.

Yes, the pipe nipple is suitable for use with hot liquids and withstands operating temperatures of up to 180°C. Ensure a temperature-resistant thread seal.

Yes, the pipe nipple can also be used for gas installation. The areas of application expressly include gas installations as well as industrial plant construction.

Yes, the nipple is safe for an operating pressure of 15 bar. The maximum operating pressure of the fitting is 20 bar.

Yes, the nipple is designed for maximum operating temperatures of 180°C. It can therefore be used without problems in hot water installations or similar applications.

For a secure seal of the thread, the additional use of a suitable thread sealing material, such as hemp or Teflon tape, is required. The external threads are conical and manufactured according to the Whitworth pipe thread standard.

With a total length of 150 mm (external thread to external thread), this nipple is well suited for bridging medium distances. Note that the threads at both ends still need sealing material and insertion depth.

Yes, the threaded fitting can also be used in refrigeration and air conditioning systems. The temperature resistance up to 180°C means that even very low temperatures are not a problem.

The pipe nipple is designed for temperatures up to 180°C. Therefore, it permanently withstands 80°C water temperature in a circulation pipe.

Yes, the galvanized pipe nipple is explicitly suitable for gas installations. It can be used at pressures up to 20 bar and temperatures up to 180°C.