Mineral Wool Disposal Bag, 140x220 cm, 1200 Liter Capacity

A fully filled KMF sack with 1200 liters can become very heavy, depending on the material's density. Moving it usually requires a hand truck or several people.

The dimensions of 140 x 220 cm refer to the outer dimensions of the flat-laid sack. The usable filling height and width vary slightly depending on the filling.

Yes, the bag is made of coated polypropylene fabric and is very sturdy. It was specifically designed for the safe collection and transport of mineral fiber waste.

No, the BONI-42293K-1 is specifically designed for mineral fiber waste (KMF) such as glass and stone wool. For asbestos waste, you need special, labeled Big Bags.

Yes, the KMF bag has a capacity of about 1200 liters. This is sufficient for the disposal of insulation material from an area of about 10-15 m² with an insulation thickness of 10 cm. Roughly calculated, this corresponds to a volume of about 1000 to 1500 liters.

Yes, the KMF bag is specifically designed for mineral fiber waste, which includes both glass wool and rock wool. The product categories confirm the suitability for glass wool.

The KMF bag is primarily intended for the safe disposal of mineral fiber waste such as glass and stone wool. For regular construction debris, you should use special construction debris bags or containers.

The bag is made of coated polypropylene fabric, which provides additional stability and water resistance. Light rain during filling should therefore not be a problem. However, prolonged storage of the filled bag outdoors is not recommended.

The bag has a capacity of approximately 1200 liters. For 15 m² of attic area with 10 cm insulation thickness, about 1500 liters of volume are needed. It could therefore be a bit too small or require very compact filling. (roughly: for this amount, around 1.5 bags would be required).

Yes, the coated PP fabric of the bag ensures high tightness. This is crucial for the safe containment and protection from mineral fiber waste according to TRGS 521.

The bag is robust and the coating provides protection against light moisture. For longer outdoor storage, however, we recommend protecting it from direct sunlight and heavy rain.

The bag is made of polypropylene (PP) and is not fireproof. Contact with glowing cigarettes or other ignition sources should be avoided, as there is a risk of fire.

To make filling the bag easier, you can hang it on a scaffold or ladder. Alternatively, fill it gradually and carefully compact the material from the top.

The bag facilitates compliance with TRGS 521 due to its tightness and material. Additionally, pay attention to personal protective equipment such as a respirator, gloves, and safety glasses.