Threaded Fitting Pipe Nipple Galvanized 3/8" Male x 3/8" Male 100 mm

Yes, the pipe nipple is suitable for use with hot liquids and withstands operating temperatures of up to 180°C. Ensure a temperature-resistant thread seal.

Yes, the pipe nipple is specifically designed for use in industrial plant construction. It withstands pressures up to 20 bar and temperatures up to 180°C.

Yes, with a total length of 100 mm (10 cm) the nipple is suitable. Note that the threads at both ends take up about 10 mm in length, so the effective bridging length is around 80 mm.

The pipe nipple is galvanized, providing good corrosion protection. For permanent outdoor use, the threaded connections should be additionally protected to maximize longevity.

Yes, this pipe nipple has 3/8" external threads on both sides and is designed specifically to connect two internal threads. Remember to seal with Teflon tape or hemp.

Yes, the nipple has a 3/8" external thread (AG) on both sides and thus fits into a corresponding 3/8" internal thread.

Yes, pipe nipples of this kind are used among other things in sprinkler systems. Pay attention to proper sealing and the pressure resistance of the entire irrigation system.

Yes, the galvanized pipe nipple is designed for a maximum operating pressure of 20 bar. This allows for use in various high-pressure applications.

Yes, the nipple is designed for use in refrigeration and air conditioning systems. The steel material and galvanization are suitable for such applications, even at temperatures below 0°C.

Yes, the pipe nipple can be used in refrigeration and air conditioning systems. It is designed for a maximum operating pressure of 20 bar and withstands temperatures up to 180°C.

Yes, the galvanization protects the nipple from corrosion, allowing for use in outdoor areas such as sprinkler systems. However, prolonged extreme weather conditions stress the material more.

Yes, the pipe nipple is specifically designed for gas installations as well as for transporting liquids. Proper sealing of the threads is particularly important.

The galvanized steel pipe nipple is generally suitable for conveying liquids. For drinking water installations, however, you should always check national and local regulations and material approvals.

Yes, the galvanized pipe nipple is suitable for such demanding applications. It is designed for operating temperatures up to 180°C and a maximum operating pressure of 20 bar.

Yes, the pipe nipple can be used to extend or connect water pipes. It is suitable for liquids; ensure the thread sealing is done correctly.

Yes, the galvanized steel provides good corrosion protection for outdoor use over the summer. The threaded fitting is suitable for pressures up to 20 bar and is thus adequately sized for sprinkler systems.

Yes, this pipe nipple is ideal for connecting two components with 3/8" internal thread (IG), as it has 3/8" external thread (AG) on both sides.

The galvanization of the steel pipe nipple provides good corrosion protection for typical applications in mechanical engineering. For very aggressive environments, suitability should be checked individually.

The pipe nipple is designed for temperatures up to 180°C and is thus suitable for use in heating systems.

No, the threaded connections are not self-sealing. They must be sealed with a suitable thread sealant material such as PTFE tape or hemp.

Yes, this nipple is made with Whitworth pipe threads according to ISO 7-1/EN 10226-1. These are the standard for many water pipes, including old cast iron pipes, provided the thread is suitable.

The pipe nipple is suitable for sanitary installations and is used to convey liquids. An explicit certification for drinking water is not mentioned in the product description.

The stainless steel pipe nipple is designed for temperatures from -20°C to +200°C. Therefore, use in a solar system up to 150°C is entirely possible.

No special tools are needed for the installation of the nipple. Standard installation tools like pipe wrenches and the appropriate thread sealing material (e.g., Teflon tape or hemp) are sufficient.

This nipple has double-sided 2" external threads and a total length of 120 mm (12 cm). It can connect two matching 2" internal threads and bridge an 8 cm gap well.

Yes, the nipple can easily withstand an operating pressure of 15 bar. The maximum operating pressure is 20 bar.

Yes, the pipe nipple is designed for a maximum operating pressure of 20 bar. Permanent use under 15 bar is therefore possible without any issues.

Yes, the pipe nipple can also be used for gas installation. The areas of application expressly include gas installations as well as industrial plant construction.

Yes, the nipple is safe for an operating pressure of 15 bar. The maximum operating pressure of the fitting is 20 bar.

Yes, the nipple is designed for maximum operating temperatures of 180°C. It can therefore be used without problems in hot water installations or similar applications.