Threaded Fitting Brass Tap Extension 1" M x 1" F 40 mm

The faucet extension has a length of 100mm. Whether this is sufficient for your wall thickness depends on the exact depth of the needed bridging space.

Yes, the threads of this fitting are manufactured to common standards (ISO 7-1/EN 10226-1) and fit common 1/2 inch Whitworth pipe threads. The product has a 1/2" AG and 1/2" IG.

The faucet extension offers a height of 15 mm. Whether this is sufficient in your specific tight corner depends on the required overhang.

The threaded fitting is designed for pressure ranges up to 16 bar. Use in a high-pressure system up to 10 bar is therefore worry-free.

Yes, the extension is suitable for both cold and hot water. It can therefore also be used in utility water lines with warmer water.

Yes, the faucet extension has 1/2 inch external and internal threads manufactured according to the common ISO 7-1/EN 10226-1 standards. Therefore, it fits standard faucets.

Yes, this faucet extension is designed for pressure ranges up to 16 bar. You can safely use it up to this value in your installations.

Yes, the faucet extension is specifically designed for use in heating systems as well as in heating, plumbing, air conditioning, and solar technology.

Use suitable sealing material such as PTFE thread seal tape or thread sealing hemp.

Yes, the faucet extension is suitable not only for pressure areas up to 16 bar, but is also designed for the vacuum area.

Yes, to seal the threads you need additional suitable thread sealing material like PTFE sealing tape or sealing hemp. This is essential for a tight installation.

No, this faucet extension is not intended for use with saltwater or chlorinated water. It is suitable for cold and hot water lines as well as gaseous media.

Yes, the extension is made of CW617N brass, stainless and corrosion-resistant. It is designed for longevity and complies with the drinking water regulation 50930-6.

The threaded fitting is designed for pressures up to 16 bar. It is also stainless and corrosion-resistant, ensuring a long lifespan.

The external threads are tapered, while the internal threads are parallel/cylindrical. Both comply with the common standards ISO 7-1/EN 10226-1.

The faucet extension is specifically suitable for plumbers, DIY enthusiasts, and hobbyists. It is high-quality and easy to handle.

For proper sealing of the threads, you need suitable material such as PTFE thread sealing tape or sealing hemp. These are available separately.

Yes, the extension is explicitly suitable for use in solar technology as well as for cold and hot water pipes. The material is CW617N brass according to the drinking water ordinance.

Yes, the BONI-348100 has a length of 100 mm and is designed as a faucet extension precisely for such adjustments of thread depth. It has a 1/2" external thread and a 1/2" internal thread.

The faucet extension is made of high-quality CW617N brass, which is durable and corrosion-resistant. For a firm and lasting connection, proper sealing of the threads with sealing tape or hemp is crucial.

Yes, this faucet extension can also be used in the vacuum area. It is designed for liquid and gaseous media.

Yes, the thread must absolutely be sealed with a suitable sealing material. Without sealing tape or hemp, a permanently tight connection cannot be ensured. The external thread is conical/tapered, the internal thread is parallel/cylindrical, which allows for a secure seal with the mentioned materials.

Yes, the faucet extension BONI-348100 is made of CW617N brass, making it rust-free and corrosion-resistant. It is suitable for outdoor use and normal weather conditions. Please note, however, that it is not intended for saltwater or chlorinated water.

The faucet extension is designed for pressure ranges up to 16 bar. This is usually more than sufficient for typical household water connections. (Approximately: Typical household water pressure is 3-6 bar.)

Yes, this threaded fitting is a faucet extension with a fixed length of exactly 50 mm. It is designed to create an exact extension between two 1/2 inch threads.

The 1/2-inch fitting is usable for liquid and gaseous media and is designed for pressure ranges up to 16 bar. It is therefore also suitable for gas lines. Ensure compliance with local installation regulations.

Yes, the faucet extension is stainless and corrosion-resistant. It is suitable for use in cold and hot water lines. However, in case of frost risk, outdoor water lines should be emptied.

No, this fitting is not suitable for salt water and chlorinated water. For pool water, we recommend choosing a product specifically designed for these conditions.

The product is suitable for experienced DIYers as well. To seal the threads, you will need suitable thread sealing material such as PTFE thread seal tape or sealing hemp.

No, this brass fitting is not suitable for saltwater and chlorinated water. We recommend using it exclusively for cold and hot water as well as other non-saline or non-chlorinated media.