SDS Plus Hammer Drill Bit, 16mm, 4 Cutter, Concrete & Masonry

The significantly lower noise emissions of the SDS Plus drill ensure more pleasant work. This is particularly advantageous during longer use in noise-sensitive environments such as residential buildings.

Yes, the SDS Plus drill bit is suitable for masonry and brick. Thanks to the large-volume drill dust flutes, the drill dust is quickly removed.

Yes, the greatly reduced vibrations from the spiral make overhead drilling noticeably more comfortable. This reduces fatigue and increases precision when working overhead.

Yes, the drill bit is expressly suitable for bricks and masonry. It also delivers precise and fast results in these materials.

The symmetrical head ensures precise and centered drilling, even in demanding materials. The vibrations are also greatly reduced, which improves guidance.

The drill has a total length of 210 mm. A 25 cm thick wall cannot be drilled through in one pass, you would have to drill from both sides. (Roughly: the maximum effective drilling depth is approx. 160 mm to 180 mm).

Yes, the drill bit with a special hard metal plate is designed for precise drilling in hard natural stones like basalt. The 4-cutter head ensures efficient material removal.

Yes, with a total length of 210 mm (21 cm), the drill bit is sufficient for a through hole in an 18 cm thick reinforced concrete wall.

The large-volume drill chip flutes and short spiral entrances of the drill ensure rapid chip removal. Frequent manual cleaning of the drill hole is therefore less often necessary.

Yes, the vibrations are greatly reduced by the special spiral geometry of the drill bit. This contributes to more comfortable and precise drilling.

Yes, this rotary hammer is specially designed for precise drilling in reinforced concrete. The dynamic core reinforcement ensures stability even under torsional stress.

The dynamic core reinforcement of the drill ensures maximum energy transfer. This accelerates the drilling progress and significantly reduces the force required when drilling.

Yes, with a total length of 210mm, the 16mm drill bit is suitable for deep drilling in concrete. The effective drilling depth is about 160-170mm (roughly calculated: with a clamping length of 40-50mm).

Yes, the symmetrical design of the head ensures precise and pinpoint drilling as well as centric guidance in the borehole. This leads to a clean drilling pattern.

The usable working length of the SDS Plus drill bit with a total length of 210 mm is approx. 150 mm. The remaining length is used for theaufnahme in the rotary hammer and the efficient removal of drill dust. (Roughly calculated: about 70% of the total length is effective usable length).

The drill bit has a special hard metal plate and the highest soldering temperature thanks to special soldering. This ensures stability and heat resistance even during prolonged use.

Yes, the SDS Plus drill bit offers industrial quality and is very robust. The dynamic core reinforcement is stable against extreme torsional stress, ideal for many holes.

Yes, the drill bit is specially designed for precise drilling in reinforced concrete. The carbide plate and dynamic core reinforcement ensure stability.

Yes, the drill bit is specially designed for hammer drills in the 2-4 kg class. Your 3 kg hammer drill is therefore ideally suited for this drill bit.

Yes, precise drilling in marble is possible with the drill. The symmetrical design of the head ensures pinpoint guidance.

Yes, the drill is also suitable for precise drilling in tiles. Please drill without impact until the material is broken through.

The symmetrical head and the centric guide allow for precise and pinpoint drilling. This minimizes the risk of material breakout even when drilling close to the edge in concrete.

Yes, the drill is designed for use in reinforced concrete with reinforcing steel. The 4-cutter technology and special hard metal plate ensure long service life and prevent rapid blunting.

The drill bit has a total length of 210 mm. For through holes, the wall thickness must be less than this length to allow for setting from one side.

The drill bit is designed for hammer drills of the 2 - 4 kg class to ensure optimal performance and safety. It is not recommended for devices under 2 kg.

Yes, the SDS Plus drill bit is suitable for precision drilling in tiles and concrete. The dynamic core reinforcement and the special hard metal plate ensure stability even with material changes and prevent jamming.

Yes, the drill can be used for precise drilling in granite. Make sure you have a clean starting point and sufficient cooling.

The drill is suitable for granite and ensures efficient work thanks to the symmetrical head and fast removal of drill dust. The vibrations are greatly reduced.