7.5m Misting System for Patio, Garden Cooling

For optimal atomization of the mist and full cooling performance, a water pressure of at least 2 bar is recommended. With significantly lower pressure, the formation of mist and thus the temperature reduction may be impaired.

Yes, the included internal thread connection G¾" is a standard size and fits most commercially available garden hoses and faucets.

The basic set BONI-52-270 contains 4 mist nozzles and one impact nozzle. The number of nozzles can be increased by expanding with additional spray mist sets.

The misting system effectively cools the immediate surroundings and lowers the temperature by up to 11 degrees. A precise area specification depends on the installation method.

Yes, the BONI-52-270 is also suitable for watering seedlings and young plants. The fine mist prevents overwatering or damage to sensitive plants.

Yes, the set includes a 7.5-meter hose with a diameter of 8 mm.

The set contains 4 mist nozzles. With the 7.5-meter-long hose, this is sufficient to effectively cool the immediate surroundings of an area of about 10m², such as a balcony or part of a terrace (roughly calculated: the hose covers a circumference of 7.5m).

The installation is deliberately kept simple. The set contains all the necessary components such as hose, nozzles and mounting material for quick assembly.

Yes, the 7.5 meter long hose of the system should be sufficient for a 5 meter long, L-shaped balcony. Plan the laying along the edges well.

The misting system effectively cools the ambient air with fine mist by up to 11 degrees. A water sprinkler primarily moistens and rarely has the same cooling effect.

Yes, the mist spray system is designed to be extended in length. You can extend it by purchasing additional identical sets.

Yes, the 8 mm diameter hose is flexible enough to attach it to round structures like a pavilion with the supplied mounting clips and hooks. The clips and hooks allow for secure mounting.

Yes, the installation of the system is described as easy thanks to the included fasteners and the pre-assembled hose. It does not require any special tools or expert knowledge.

Yes, the nozzles atomize the water into a very fine mist. This is ideal for humidifying the air in greenhouses and for gently watering sensitive plants such as orchids, seedlings or young plants without soaking them. (Roughly: 2 liters of water per hour is a very low consumption and does not overwater plants.)

Yes, the set includes 10 mounting clips and 10 mounting hooks, which are suitable for attachment to pergolas, awnings or roofs. The hose has a length of 7.5 meters.

With 4 mist nozzles on a 7.5m hose, you can easily cover a 4m wide awning. The nozzles can be flexibly positioned along the length of the hose.

The nozzles atomize the water into a fine mist that cools the immediate surroundings. The effect is noticeable directly in the vicinity of the installed nozzles.

The basic set contains 4 mist nozzles for 7.5 meters of hose. For a 10-meter terrace front, you should plan for about 1-2 additional nozzles to keep the cooling effect even. (Roughly calculated: This corresponds to about 5-6 nozzles over a total length of 10 meters).

The water consumption of the misting system is 2 liters per hour at a water pressure of 2 bar. This corresponds to a low consumption, about a bucket of water every five hours.

The BONI-52-270 is designed so that it can be extended in length by additional sets. The components fit directly into each other, special adapters are not required for this. Another complete set contains all the necessary parts for the extension.

The misting system effectively cools the immediate area around the nozzles. The specified temperature reduction refers to this direct area. A larger area is pleasantly refreshed, but the maximum reduction is localized.

The fine water mist cools the ambient air. With continuous operation, increased humidity on surfaces such as wooden floors is possible. Please check the type of wood for moisture sensitivity.

The set includes a total of 4 mist nozzles, which atomize the water into a fine mist. An impact nozzle is also supplied.

The mounting hooks and fastening clips included in the set are intended for the general installation of the system. They allow flexible attachment to various solid structures such as pergolas or walls.

Fine mist nozzles can clog over time if the water is high in limescale. It is recommended to clean the nozzles regularly if necessary. A water filter can also be connected for very hard water.

The mist is very fine and can be blown away a bit in strong wind. However, in light wind, the cooling effect in the immediate surroundings is still noticeable.

Yes, the spray mist system is designed to effectively lower the temperature of the immediate environment. The product description states a reduction of up to 11 degrees.

Yes, the spray mist system is flexible and can also be attached to the umbrella. The included clips and hooks make assembly easier.

At a pressure of 2 bar, the water consumption of the system is 2 liters per hour. The maximum permissible pressure is 6 bar. (Roughly calculated: With 8 hours of operation, that would be about 16 liters of water.)

The included hose has a length of 15 meters. The set contains 7 mist nozzles and one impact nozzle.