Spray Mist System 15 m

At a pressure of 2 bar, the water consumption of the system is 2 liters per hour. The maximum permissible pressure is 6 bar. (Roughly calculated: With 8 hours of operation, that would be about 16 liters of water.)

The included hose has a length of 15 meters. The set contains 7 mist nozzles and one impact nozzle.

Yes, the system is designed for watering orchids. The very fine spray mist ensures gentle humidification and watering without damaging the plants.

The 7 mist nozzles on a 15m hose are designed for cooling the immediate surroundings. For an area of 20m² effective cooling can be achieved, if necessary the system can be expanded with further sets.

The system is able to lower the temperature in the immediate surroundings by up to 11 degrees.

Yes, the included G¾" internal thread connection fits most standard water taps and garden hoses.

Yes, the system is very suitable for humidifying in greenhouses. It can also be used for direct irrigation of orchids, seedlings and young plants.

The misting system is designed for continuous operation and there is no specific maximum operating time. Pay attention to a stable water supply and the permissible pressure range up to 6 bar.

The 15m hose with 7 mist nozzles is well-suited for even air humidification in many greenhouses. For larger areas, the system can be extended with additional sets to optimize the effect.

The spray mist system can be extended in length with additional sets. To obtain the optimal cooling effect, the maximum operating pressure of 6 bar should be observed. A slight pressure drop is normal with very long systems.

The set includes 16 mounting clips and 16 mounting hooks. These are designed for stable attachment to a roof, awning, umbrella or pergola and should also be sufficient for your sun umbrella.

Yes, the system is ideal for cooling in outdoor areas and can also be mounted on balconies or loggias. The included clips and hooks allow for flexible attachment.

For a stable attachment to awnings, roofs or pergolas, 16 mounting clips and 16 mounting hooks are included in the set. This allows the hose to be securely fixed.

Yes, the system comes with a G¾" female thread connection that fits standard garden hose connections.

The set includes 7 mist nozzles distributed over a 15-meter hose, which ensures good distribution for cooling the immediate surroundings. The nozzles can be positioned along the hose.

With a water consumption of 2 liters per hour at 2 bar pressure, you can operate the system with 50 liters of water for about 25 hours. (roughly calculated: 50 liters / 2 liters/hour = 25 hours).

The nozzles should be attached so that the fine mist reaches the immediate surroundings of the seating area and cools it down. Positioning on the roof, on the awning or pergola is ideal.

The system generates a fine mist that evaporates to cool. As a rule, no significant damp or slippery spots appear on the floor.

Yes, the system is also excellent for humidifying the air in greenhouses and for irrigating seedlings or young plants.

The system requires a water pressure of at least 2 bar for the specified consumption. A rain barrel usually does not provide enough pressure; an additional pump would be required for this. The connection is a standard G¾" internal thread.

The supplied 16 mounting clips and 16 mounting hooks are designed for secure attachment to various structures such as patio roofs. When installed correctly, they hold the system reliably.

The nozzles create a fine mist to cool the immediate surroundings. For optimal comfort without wetness, we recommend maintaining a distance of about 1-2 meters from the seats.

The water consumption of the spray mist system is rather low at 2 liters per hour at a pressure of 2 bar. This corresponds to the consumption of about two minutes of showering.

The set contains 15 meters of hose and 7 mist nozzles. The length is sufficient for a circumference of 15 meters, to partially or completely surround the pavilion, depending on the size. For complete 360° cooling in larger pavilions, additional sets may be needed for expansion.

The system is designed for outdoor use. However, in strong wind, the fastening should be checked regularly for a firm hold to prevent detachment. It is not explicitly designed for extreme storm situations.

Yes, the system is ideal for watering young plants, seedlings or orchids. The fine mist is particularly gentle on sensitive plants and can also be used for humidifying the air in the greenhouse.

Yes, the spray mist system is designed so that it can be extended in length with additional sets.

Normal tap water is intended for operation. To avoid clogging due to limescale or dirt particles, an optional water filter can be recommended. Regular flushing of the pipes also helps.

At a pressure of 2 bar, the water consumption of the system is 2 liters per hour. This corresponds to about one filling of a smaller watering can per hour.

The nozzles atomize the water into a very fine mist. With correct installation and sufficient evaporation outdoors, there are usually no damp or sticky residues left on the floor.