Graphite Rainwater Collector for 63mm Downspout

In case of contamination, the rain collector should be rinsed several times with pressurized water. It is also recommended to mount it in places that are not exposed to large amounts of contaminants such as leaves.

The rain collector is specially designed for downpipes with an outside diameter of exactly 63 mm. For other diameters, optimal fit and tightness are not guaranteed.

Yes, the kit contains a quick connector in the size 1'' which allows the problem-free connection with a standard garden hose.

Yes, the assembly of the rain collector is kept simple and can also be carried out by laymen. The set is complete with connection and quick connection.

You can close the outlet to the container with the additional closure plug. This will stop the flow of water into the rain barrel, and the rainwater will drain normally through the downspout.

Yes, the additional closure plug makes it possible to completely close the drain from the rain collector to the collection container. This way, the water can be directed directly into the downpipe if needed.

The material (PVC) of the collector is robust and impact-resistant. The impact strength is ≥ 500 kJ/m², which means good resistance to accidental impacts.

The rain collector does not necessarily have to be removed in winter. You can close the drain with the additional closure plug to avoid frost damage if the container is full.

Yes, the material polyvinyl chloride (PVC) is robust and suitable for outdoor use. The Vicat softening point of ≥ 75 °C and the small color change after aging confirm the resistance.

The kit contains the water recuperator, the connection, a quick coupling (1'') and an end cap. A garden hose for connecting to the rain barrel is not included.

Yes, the material (PVC) of the recuperator is UV-stable and heat-resistant. The Vicat softening point is ≥ 75 °C, which ensures good resistance to sunlight.

It is recommended to mount the collector in places without heavy contamination. To minimize clogging by leaves, you can install a leaf trap sieve in the downpipe above the collector.

The rain collector does not need to be dismantled for cleaning. It can be rinsed several times with pressurized water while installed to remove contaminants.

The rain collector is specially designed for downpipes with an outer diameter of 63mm. The upper inner diameter is also 63mm.

The rain collector is intended for the recovery of rainwater for garden irrigation or other technical purposes. The collected water is not suitable as drinking water.

Yes, the rain collector is specially designed for downpipes with an outer diameter of 63mm. It only fits this size.

The rain collector enables efficient rainwater recovery and storage from gutter systems. It is designed for this use in normal rainfall.

The rain collector has a height of 126 mm (12.6 cm). It therefore requires at least 12.6 cm of free downpipe length for installation.

Yes, the rain collector can be retrofitted in both new and existing downpipes. The set contains all the necessary elements for connection to a tank.

The rain collector is designed for downpipes with an outer diameter of 63mm. The type of material of the downpipe (metal or plastic) is not relevant as long as the diameter fits.

We recommend mounting the rain collector in areas without large amounts of contaminants like tree leaves. If contaminated, the device should be cleaned several times with pressurized water.

In case of contamination, the rain collector should be rinsed several times with pressurized water. It is generally recommended not to install it in places with large amounts of contaminants like tree leaves.

The rain collector has a Vicat softening point of ≥75 °C, but is not specifically designed for frost.

Yes, the rain collector is made of polyvinyl chloride (PVC) and has a PZH approval. This confirms the hygienic safety of the material for contact with water.

If necessary, the rain collector should be rinsed several times with pressurized water. This ensures efficient removal of deposits.

Yes, the kit includes the water recuperator, a connector, a quick connector, and an end cap. This allows for easy connection to the garden hose and rain barrel.

Yes, the rain collector allows the connection of a garden hose (quick-connect size 1'') to drain rainwater into a container. It is important that the container is placed lower than the rain collector so that the water can flow by natural gradient.

The rain collector can remain mounted in winter. You can close the drain to the container with the additional stopper plug to prevent unwanted water flow into the container during the frost period.

Yes, the rain collector is equipped with an additional sealing plug. With it, you can close the outflow from the recovery tank when needed, for example if the rain barrel is full.

The rainwater collector is designed for installation in downpipes with an outer diameter of 110mm and can be installed in both new and existing downpipes. The installation is simple and can be done yourself.