90mm Rainwater Collector, Graphite Downspout Diverter Kit

We recommend mounting the rain collector in areas without large amounts of contaminants like tree leaves. If contaminated, the device should be cleaned several times with pressurized water.

In case of contamination, the rain collector should be rinsed several times with pressurized water. It is generally recommended not to install it in places with large amounts of contaminants like tree leaves.

The rain collector has a Vicat softening point of ≥75 °C, but is not specifically designed for frost.

In case of contamination, the rain collector should be rinsed several times with pressurized water. It is also recommended to mount it in places that are not exposed to large amounts of contaminants such as leaves.

Yes, the rain collector is made of polyvinyl chloride (PVC) and has a PZH approval. This confirms the hygienic safety of the material for contact with water.

If necessary, the rain collector should be rinsed several times with pressurized water. This ensures efficient removal of deposits.

Yes, the kit includes the water recuperator, a connector, a quick connector, and an end cap. This allows for easy connection to the garden hose and rain barrel.

Yes, the rain collector allows the connection of a garden hose (quick-connect size 1'') to drain rainwater into a container. It is important that the container is placed lower than the rain collector so that the water can flow by natural gradient.

The rain collector can remain mounted in winter. You can close the drain to the container with the additional stopper plug to prevent unwanted water flow into the container during the frost period.

Yes, the rain collector is equipped with an additional sealing plug. With it, you can close the outflow from the recovery tank when needed, for example if the rain barrel is full.

The rainwater collector is designed for installation in downpipes with an outer diameter of 110mm and can be installed in both new and existing downpipes. The installation is simple and can be done yourself.

Yes, the rain collector has an additional closure plug. It allows the outflow from the recovery tank to be closed when necessary.

Yes, this rain collector is specifically designed for downpipes with an outer diameter of 110 mm. The upper inner diameter of the collector is also 110 mm.

The rain collector is designed for installation in downpipes with an outer diameter of 110 mm. The material of the downpipe is not further restricted as long as the diameter is correct.

The installation of the rain collector is simple and can be done yourself. The set includes all necessary elements for a quick connection.

Yes, the rain collector is designed for installation in both new gutter systems and retrofitting into existing downpipes. The installation is simple and can be done yourself.

The rain collector is made of robust PVC, whose properties ensure good durability. The Vicat softening point is ≥ 75 °C, and the color change after aging is minimal (≤ 3 gray shades), indicating good UV stability.

Yes, the quick connector is 1'' in size and is designed for connecting a garden hose. This allows rainwater to be easily diverted into a container.

Yes, the set includes a quick connector that allows connection with a garden hose. For efficient water drainage into the container, the hose should be laid with a slight slope so that the water can drain.

Yes, the rain collector has an additional sealing plug. It allows the drain from the recovery tank to be completely closed when needed.

Yes, the rain collector is made of durable PVC and has a Vicat softening point of ≥ 75 °C. It is therefore well-suited for use in direct sunlight and high temperatures.

The rain collector is designed flexibly and can be installed both in newly built gutter systems and retrofitted into existing downpipes.

Yes, for installation, a suitable section must be cut out of the 63mm downpipe to insert the rain collector. The installation is designed to be simple and can be done yourself.

We recommend mounting the rain collector in areas not exposed to large amounts of contaminants like tree leaves. If needed, the collector can easily be cleaned with pressurized water.

The assembly of the rain collector is described as simple and can also be done independently. The elements included in the set allow for a quick and easy connection.

The kit includes the water recuperator, a connection, a quick connector, and an end cap. Yes, with the included quick connector, direct connection of a garden hose (1'') is possible.

The rain collector is equipped with a quick coupling of size 1''. This allows direct connection of a standard garden hose for draining rainwater.

The rain collector is made of PVC. To avoid frost damage, the drain should be closed with the stopper in winter and the collected water should be drained from the system to prevent freezing.

Yes, the rain collector is designed for both installation in new gutter systems and retrofitting into existing downpipes. The installation is easy to accomplish.

No, this rain collector is exclusively designed for downpipes with an outer diameter of 63mm. The upper inner diameter is also 63mm.