1 Inch Water Suction & Pressure Hose Set - 2 Meter

The hose is designed as a robust suction and pressure hose and is well-suited as a fixed suction line. However, please note that the hose is not certified for drinking water.

Yes, the BONI-82231-2 set is quick and easy to install thanks to the hose connections on both sides and the stainless steel hose clamps. You get a complete set that is ready to use immediately.

Yes, the hose has an inner diameter of 1 inch (25 mm) and is equipped with hose connections on both sides, suitable for common pump connections of this size.

The hose is designed for use on construction sites and is characterized by its robustness and durability. Slight contamination such as small stones does not pose a problem for it.

Yes, the integrated plastic spiral in the PVC hose ensures dimensional stability. This effectively prevents collapse or kinking under suction load.

Yes, this suction and pressure hose set is ideal for pumping rainwater from cisterns. It is robust and designed for a variety of water applications.

The set has hose connections on both sides, which in principle makes it possible to connect with additional hoses. Pay attention to a correct seal.

The hose clamps are made of robust W4 stainless steel and are designed for a secure and durable connection. They offer a firm hold even in applications with higher pressure.

The robust stainless steel hose clamps (W4) and the hose fitting included in the set ensure a secure and tight connection. The set is designed for high load capacity.

The hose is made of PVC with an integrated plastic spiral, which gives it high dimensional stability even when vacuuming. This effectively prevents contraction or kinking.

The inner diameter of 25 mm (1 inch) is a common size for many pumps. It enables a good flow rate and is suitable for various applications.

Yes, the set is designed for use in pools and is durable and reliable thanks to its high-quality materials.

Yes, the hose is made of PVC with a plastic spiral and is designed for a variety of applications, including construction sites. The robust construction ensures stability in drainage tasks.

The PVC material with plastic spiral ensures good flexibility of the hose. It is therefore easy to handle and lay around corners or curves.

The 2-meter length is sufficient for many applications in the garden pond to connect a pump. The complete set is also ready for immediate use.

Yes, the hose is made of PVC with an integrated plastic spiral. This construction ensures that the hose remains dimensionally stable even during suction operation.

The robust stainless steel hose clamps and the hose connections on both sides ensure a secure and tight connection. The set is designed for use in agriculture.

The PVC material of the hose can become brittle in frost. We recommend emptying the set and storing it dry in freezing temperatures to maintain its lifespan.

Yes, the BONI-82231-2 is intended for use in agriculture. It is suitable for sucking and pumping water.

The hose is made of robust PVC with a plastic spiral and is designed for durability. However, for maximum lifespan, we recommend storing it in a protected place during extreme weather conditions.

Yes, the inner diameter of the hose is 1 inch (25 mm), which is a common size for garden pump connections. Thus, a wide compatibility is given.

The 1 inch (25 mm) inner diameter generally allows for a higher flow rate than hoses with a smaller diameter. This is advantageous for quickly pumping large amounts of water.

Yes, the hose is made of high-quality materials and is described as durable and reliable. The robust stainless steel hose clamps also contribute to the durability.

Yes, the suction and pressure hose set is explicitly designed for applications such as pools. The robust design and high load capacity ensure reliable use when emptying.

The length of the hose is 2 meters. Whether this is sufficient for your pond pump depends on the exact location of the pump and the bridging distance required.

Yes, this set is ideal for use on pond pumps as a suction and pressure hose. The high-quality workmanship ensures safe operation.

Yes, the PVC hose with a plastic spiral is specially designed for demanding environments such as the construction site. Its robust nature and high load capacity ensure reliability under heavy use.

The set's double-sided hose fitting is designed for easy and quick installation. Usually, this can be tightened without special tools.

The hose is made of PVC with a plastic spiral and is suitable for use on construction sites. It is robust and designed for high load capacity.

The hose is designed as a suction and pressure hose and offers high stability thanks to the PVC with plastic spiral and stainless steel clamps. It is designed for use in pools and is very durable.