1 Inch Suction and Pressure Hose Set, 25mm, 3m, Flexible Water Hose

The hose is robust and designed for water transport tasks. Smaller particles in the dirty water should not be a problem, as long as they do not clog or mechanically damage the diameter.

Yes, the hose is designed as a pressure hose with a working pressure of 6 bar and an inner diameter of 1 inch (25 mm). This allows for a good water flow, which is sufficient for operating smaller fountains.

Yes, the hose is flexible and reinforced with a plastic spiral that prevents kinking. It can be easily laid along edges.

Yes, the hose is designed for a working pressure of up to 6 bar. This is sufficient for most household water connections and common pumps.

Yes, you can connect several hoses of this type together. For this you need suitable hose connectors and additional clamps, which are not included.

The 3-meter length of the hose is designed for short distances. For distribution over a larger lawn, it is more intended as a supply line to the pump or for direct drainage.

Yes, the suction and pressure hose set is suitable for emptying pools. The length of 3 meters is ideal for short distances.

Yes, the set is suitable as a suction and pressure hose and can be easily used to empty rainwater barrels. With the 1 inch (25 mm) inner diameter, a good flow is guaranteed.

The hose is made of robust PVC with a plastic spiral and is resistant to various environmental influences. However, storage in the shade generally extends the life of all PVC products.

Thanks to the plastic spiral, the hose is flexible and robust and resistant to kinking. However, to maximize the service life and prevent blockages, it is recommended to roll it up properly after use.

The 3-meter hose is very flexible and easy to handle due to its material and length. The weight is also not a problem for older people.

The set includes hose fittings and stainless steel clamps. A direct connection to a standard garden tap (often 1/2 or 3/4 inch) usually requires an additional adapter, as the hose has an inner diameter of 1 inch.

Yes, the set is suitable for pool projects due to its robustness and suction and pressure function. You can use the hose to fill or empty the pool or to connect to a filter system.

Yes, the set is complete for connecting a pump with a 1-inch connection. It contains the 3-meter long suction and pressure hose, a hose fitting, and two stainless steel clamps.

In principle, the PVC hose with spiral can be shortened. However, please note that you will then need new hose fittings and clamps for the shortened section, as the set only contains one set.

Yes, the suction and pressure hose is robust and flexible, ideal for pond projects. It is designed for reliable use for water conveyance and irrigation.

The hose is made of PVC and is primarily intended for garden, pond and pool projects. It is not certified for drinking water applications.

Yes, the PVC material of the hose is generally resistant to salt water. The stainless steel clamps also offer good corrosion resistance.

The hose has an inner diameter of 1 inch (25 mm). The supplied fittings and clamps fit common pumps with a 1-inch connection. For IBC containers, you may need a suitable adapter for the IBC outlet.

The hose is robust and resistant to environmental influences. However, it should not remain outdoors permanently in frost to avoid material damage from freezing water.