90° elbow BF-22 lock

Yes, the angle is suitable for both drip hoses and unperforated hoses.

The angle is optimized for above-ground installations. For underground use, additional sealing is recommended.

The angle is robust, but it is recommended to protect it from direct UV radiation to increase longevity.

Yes, the angle can be easily cleaned to maintain optimal performance and tightness.

The angle is designed for high pressure and provides stable sealing under typical irrigation pressure conditions.

Yes, the angle is ideal for garden irrigation systems and increases flexibility in pipe laying.

The angle is suitable for pipes with an outer diameter of 16 mm, regardless of the material, as long as the connection is tight.

The angle is easy to mount and quick to assemble, no special tools are required.

Clean the pipe ends before insertion to achieve optimal tightness.

Yes, the angle is designed for hoses, pipes, and lines with an outer diameter of 16 mm.

Yes, multiple angles can be used in a row to create complex irrigation systems.

The PP material is durable and resilient, especially with dry and UV-protected storage.

The angle is primarily designed for water. For other liquids, the chemical resistance should be checked.

With proper care and storage, the angle is durable and resistant to environmental influences.

The lock mechanism ensures a secure connection for hoses or pipes with an outer diameter of 16 mm.

Yes, the angle is often used in agriculture and is suitable for systems with varying pressure.

The PP material is frost-resistant, but extreme cold can affect the seal. Frost protection measures are advisable.

No, the angle can be mounted quickly and easily without special tools.

Yes, the elbow ensures a reliable and tight connection of 16 mm PE pipes.

Yes, the stable construction from PP ensures high pressure resistance and reliable tightness.

The T-piece is specially designed for connecting drip hoses and PE pipes with a diameter of 16 mm. For other hose types, the fit or tightness cannot be guaranteed.

Yes, this connector is designed to ensure a tight and reliable connection for your irrigation system. The robust PP material contributes to its durability.

Yes, the connector is specially designed for connecting drip hoses and PE pipes with a diameter of 16mm. A combination of both types is easily possible.

The lock system allows quick and easy assembly. Disassembly is basically possible, but should be done carefully so as not to damage hoses or PE pipes.

Yes, the T-piece 16mm is explicitly suitable for micro irrigation systems. It is an indispensable accessory for this type of garden irrigation.

The T-piece is designed to ensure efficient water distribution. It does not noticeably reduce the flow to allow for optimal irrigation.

The T-piece ensures a reliable and tight installation of your irrigation systems. The robust PP material guarantees durability even with permanent use, e.g. underground.

Yes, the T-piece is brown. This color blends discreetly into the garden environment and is less noticeable than lighter colors.

The T-piece allows you to branch drip hoses and PE pipes in three directions. This is ideal for flexibly adapting irrigation lines to the conditions of your garden.

Thanks to the Lock system, the assembly of the T-piece is very easy and quick. It does not require excessive force to create a tight connection.