16mm Irrigation Hose End Cap Plug for Drip Tubing

The T-piece is specially designed for connecting drip hoses and PE pipes with a diameter of 16 mm. For other hose types, the fit or tightness cannot be guaranteed.

Yes, the angle is suitable for both drip hoses and unperforated hoses.

Yes, this connector is designed to ensure a tight and reliable connection for your irrigation system. The robust PP material contributes to its durability.

Yes, the connector is specially designed for connecting drip hoses and PE pipes with a diameter of 16mm. A combination of both types is easily possible.

The lock system allows quick and easy assembly. Disassembly is basically possible, but should be done carefully so as not to damage hoses or PE pipes.

Yes, the T-piece 16mm is explicitly suitable for micro irrigation systems. It is an indispensable accessory for this type of garden irrigation.

The T-piece is designed to ensure efficient water distribution. It does not noticeably reduce the flow to allow for optimal irrigation.

The T-piece ensures a reliable and tight installation of your irrigation systems. The robust PP material guarantees durability even with permanent use, e.g. underground.

Yes, the T-piece is brown. This color blends discreetly into the garden environment and is less noticeable than lighter colors.

The T-piece allows you to branch drip hoses and PE pipes in three directions. This is ideal for flexibly adapting irrigation lines to the conditions of your garden.

Thanks to the Lock system, the assembly of the T-piece is very easy and quick. It does not require excessive force to create a tight connection.

The T-piece is precisely designed for 16mm drip hoses and PE pipes. For a tight and reliable connection, exactly 16mm diameter is required.

Absolutely. The T-piece is ideal for connecting drip hoses and PE pipes for efficient water distribution, as is typical for tomato rows.

Yes, the 16mm T-piece is ideal for connecting drip hoses in irrigation systems, including in greenhouses. It ensures efficient water distribution.

Yes, the T-piece is explicitly designed to branch a main line. It enables efficient water distribution to three connections.

Yes, the connector is designed for all standard 16 mm drip hoses and PE pipes, regardless of the manufacturer. The only important thing is the correct outer diameter of 16 mm.

Yes, the connections are designed for a reliable and permanently sealed installation. The robust PP material contributes to the longevity of the system, even over longer distances.

The T-piece is made of robust polypropylene (PP), which is designed to withstand extreme weather conditions. This usually includes good UV resistance for permanent outdoor use.

The locking system is designed for quick and easy installation, ensuring a tight connection. Reusability after detaching is possible depending on use and care when separating, but is not explicitly designed for permanent use.

Yes, the T-piece is made of robust polypropylene (PP) and can withstand extreme weather conditions, including frost. Disassembly in winter is not absolutely necessary.

The T-piece is designed for a reliable and tight installation that also holds up under normal system pressure in the garden. The Lock system ensures a firm hold.

No, thanks to the Lock-System, the T-piece is quick and easy to install without special tools. It only requires inserting and securing the hoses.

The angle is optimized for above-ground installations. For underground use, additional sealing is recommended.

The angle is robust, but it is recommended to protect it from direct UV radiation to increase longevity.

Yes, the angle can be easily cleaned to maintain optimal performance and tightness.

The angle is designed for high pressure and provides stable sealing under typical irrigation pressure conditions.

Yes, the angle is ideal for garden irrigation systems and increases flexibility in pipe laying.

The angle is suitable for pipes with an outer diameter of 16 mm, regardless of the material, as long as the connection is tight.

The angle is easy to mount and quick to assemble, no special tools are required.

Clean the pipe ends before insertion to achieve optimal tightness.