Impact Socket, 1/2 inch Drive, 17mm, 6-Point

Yes, the socket is designed for frequent screwing work, such as that on car chassis, thanks to its robust construction made of chrome-molybdenum steel (Cr-Mo) and the precise 6-sided design. Its industrial quality guarantees a long service life.

Yes, the nut can also be used with a torque wrench with a 1/2 inch mount. Its construction from chrome-molybdenum steel ensures high load-bearing capacity.

The nut is manufactured in industrial quality and made of high-strength chrome-molybdenum steel. This makes it very robust and durable, even for regular use in a car workshop.

The impact wrench socket is made of robust chrome-molybdenum steel and is declared as industrial quality. With proper use and storage, a long service life can be expected, even over several years of seasonal use.

Yes, the Cr-Mo nut can also be used for stainless steel nuts. The material is robust enough for the requirements of stainless steel connections.

Yes, the socket is made of high-quality chrome-molybdenum steel (Cr-Mo), which makes it extremely durable. It is specially designed for use with impact wrenches and thus for high torques and loosening stuck connections.

Yes, the 1/2 inch socket of the nut is perfectly compatible with battery-powered impact wrenches that also have a 1/2 inch socket. The high-quality steel alloy is designed for the forces of an impact wrench.

The chrome-molybdenum steel offers good corrosion resistance. After use outdoors, the socket should be cleaned and stored dry to optimally maintain its longevity.

The precise 6-point design offers a large contact surface to the screw flanks. This reduces the risk of rounding off slightly damaged screw heads and allows for better power transmission than with 12-point nuts.

The nut is of industrial quality and made of robust Cr-Mo steel. This ensures a long service life, even with regular and intensive use in a hobby workshop.

Absolutely. The nut is made of high-quality chrome-molybdenum steel and is specifically designed for use with industrial-grade impact wrenches. It is built for long life and high durability.

Yes, the nut has a standardized 1/2 inch mount. This makes it compatible with a variety of common impact wrenches that also have a 1/2 inch mount.

If the wheel locks have a wrench size of SW17 and a 6-sided profile, the nut is suitable for this. The precise manufacturing ensures an optimal fit and power transmission.

The precise 6-sided design is designed for optimal power transmission and minimizes the risk of slipping. With correct use and the right wrench size, slipping is unlikely.

The nut is made of chrome-molybdenum steel (Cr-Mo), a material known for its robustness and durability. Occasional contact with moisture during work under the car is usually not a problem for the nut.

The socket is made of high-quality chrome-molybdenum steel (Cr-Mo) and is designated as industrial quality. This provides the highest load capacity and is ideal for continuous commercial use.

Yes, the SW17 wrench size is a common size for wheel nuts and bolts on many car models. The 1/2 inch drive is also compatible with most impact wrenches.

Yes, the 1/2 inch socket allows combination with appropriate extensions. Make sure that the extension is also suitable for use with an impact wrench to avoid material fatigue.

Yes, the impact wrench nut is specially designed for high torques and loosening stuck connections due to its chrome-molybdenum steel and robust construction. The industrial quality ensures high reliability.

The precise 6-sided design of the nut ensures optimal power transmission and a secure fit. This is also important for the controlled tightening of screws with a torque wrench.

Yes, this nut is explicitly designed for use with impact wrenches. The robust Cr-Mo steel construction ensures high wear resistance and a long service life, even when used with electric impact wrenches.

Yes, the socket is a high-quality impact wrench socket and offers optimal power transmission. It is ideally suited for loosening even stuck screws and nuts, provided they require the SW17 wrench size.

Yes, the chrome-molybdenum steel (Cr-Mo) socket is designed for high loads and optimal power transmission. It is also designed for loosening tight screws.

The socket is robustly made of Cr-Mo steel and can withstand a fall on the ground. However, before further use, it should be cleaned of dirt and small stones to protect the screw and the tool.

The SW17 socket is designed for a 17 mm wrench size and a 1/2 inch drive. However, many truck wheel nuts have larger wrench sizes than 17 mm and require stronger 3/4 or 1 inch drives. Please check the required size.

Yes, the 1/2 inch drive is a standard size that allows use with suitable adapters for other ratchet sizes. This does not affect the function or stability of the socket.

Yes, the socket has a standard 1/2 inch drive. It therefore fits directly onto your impact wrench without the need for additional adapters.

No, the 6-sided version is the standard for hex screws and nuts. It ensures a precise fit and optimal power transmission without special requirements.

The socket is made of chrome-molybdenum steel, which was specially developed for high load capacity and impact resistance. Material fatigue and breakage are unlikely with proper use.

Yes, the impact wrench socket is specially designed for demanding screw work and the highest loads. It is therefore very suitable for the assembly of machine parts with high tightening torque.